For the purposes of maintaining as small a users database as possible, I
wanted to know if it was possible for a specific DEFAULT record's reply
attributes to override any conflicting reply attributes of an individual
user entry?
Say I had the following user entries in the following format:
foo
Framed-Type = User,
Framed-Address = 192.168.1.17
bar
Framed-Type = User,
Framed-Address = 192.168.1.18
Here are the defaults:
DEFAULT Auth-Type := System, Framed-Protocol == PPP, Huntgroup-Name == local
Service-Type = Framed-User,
Framed-MTU = 1500,
Framed-Netmask = 255.255.255.255,
Framed-Compression = Van-Jacobson-TCP-IP,
Framed-Routing = None,
Idle-Timeout = 1200,
Session-Timeout = 129600
DEFAULT Auth-Type := System, Framed-Protocol == PPP, Huntgroup-Name == roaming
Service-Type = Framed-User,
Framed-MTU = 1500,
Framed-Address = 255.255.255.254,
Framed-Netmask = 255.255.255.255,
Idle-Timeout = 600,
Session-Timeout = 28800
I would want foo coming in from the roaming huntgroup to lose their
individually defined address and reply using the reply attribute under the
default entry for the roaming huntgroup instead.
--
Mark P. Hennessy [EMAIL PROTECTED]
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
