OK I admit it I had not RTFM (Read the flipin manual) The NAS box in question seems very good Cyclades PR4000 however Cyros it internal router operting system does not support thr framed-route command.
I shall tell them they should it looks like we will have to purchase some different external routers, as a work around. Thanks for your help. Joe Lewis wrote: > I think you understand the system as well as I do. Is this proxy on > your system, or is it on the NAS client? If the client is also > providing the proxy, you may need to ensure that the client is > accepting the information, and that it is being provided. > > If you are using the configuration file, another suggestion would be > to make sure that the value is enclosed in quotes, so that the > assigned IP is included as part of the string. (Of course, you've > already made sure of that, so why do I bother?) > > Another option is : start digging on the network, listening for > packets. Look for the routing packets, just to see if the information > is getting sent. > > Joe > > John Adams wrote: > >> Hi >> >> I have been a little more sensible and have looked at the RFC I wish >> the framed route to be something like this >> >> 212.60.76.0/24 212.60.76.11 0 >> >> The first section is the subnet to route to the second is the gateway >> I want the dial up PC to work through (My Squid Cache) And I do not >> understand the last bit the metric so I have tried it with 0 or 1. >> >> My problem now is that when I set these for a test users the dial up >> will not authenticate, where as it does when the user does not have >> these in their config. >> >> Do I need this in Reply and Check or just one? >> >> John >> >> Joe Lewis wrote: >> >>> John; >>> >>> I never saw a response. Most people use the term "gateway" and >>> "router" interchangeably. This will be the correct assumption, here. >>> Setting the Framed-Route should properly set the gateway or the >>> router. Documentation says that if the Framed-Route is "0.0.0.0" the >>> gateway should be the PC's own IP address. Hope it helps. >>> >>> Joe >>> >>> >>> John Adams wrote: >>> > Hi >>> > >>> > I have bought a load of kit from the UK to an Mid afcian country >>> which >>> > has a 2 existing ISPs each with 128k and I am helping someone set >>> up a >>> > third with there own 128k. >>> > >>> > We have made the radius work to authenticate a single 60 Modem >>> Cyclades >>> > PR4000 NAS however I chose the option of an X21 card on this box >>> and it >>> > makes it difficult to make the authenticated users get a gateway >>> other >>> > than the IP assigned. I want to assign a transperent proxy as the >>> gateway. >>> > >>> > My reading of the FAQ suggests that it is possible to assign IP >>> address >>> > using the framed-IP-address and framed-route. >>> > >>> > Do I undersand this right if I put a default framed-route this will >>> > provide the gateway for the authenticated users. >>> > >>> > Please excuse if I am not asking a sensible question her. >>> > >>> > However I was due to fly out today (missed that one) The people are >>> > nice but the insects are big so I want to go home one day . >>> > >> >> >> >> >> >> > > > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
