I'm curious if your server will even resolve the name of the ldap server. Is the ldap server local to the machine with freeradius?
Gene Parks -----Original Message----- From: Adrian Chadd [mailto:[EMAIL PROTECTED]] Sent: Tuesday, November 26, 2002 6:33 PM To: [EMAIL PROTECTED] Subject: Re: LDAP bind problem On Wednesday, November 27, 2002, at 08:29 AM, Samuel T Patterson wrote: > Hello again, > > Here is some more information about the problem I am seeing. Running > with debug flags shows a "Can't contact LDAP server" message. The bind > is successful if the "-s" argument is used. I would prefer to run > FreeRADIUS in multi-threaded mode, but cannot seem to get it to work! > This is a 0.8 server on Solaris 8. > > Doing a snoop, I found that in "multi-threaded mode" the server would > send a syn packet and then without waiting for a response, immediately > send a reset. > > Below I have included the LDAP portion of my radiusd.conf file. I have > changed very little in this file as I am just beginning testing to see > if I can use FreeRADIUS. Almost everything else I have left "default", > and have checked all settings I have changed to see if they affect > this problem. > > I am totally new to RADIUS so any advice would be greatly appreciated. Have you tried this on another platform to see whether its FreeRADIUS+LDAP+Solaris, or FreeRADIUS+LDAP? I'd be curious about this, before I even think about looking at the LDAP client code. Adrian - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
