X-Ascend Atributes?

[John A. Hengstler]

Hello,

 

We use 2 different wholesale Dial ISP's that do pass-thru authentication/accounting with our radius server.

 

Both companies are using cisco equipment.

 

Everything seems to work well, except the following: 

 

The connection attributes are not getting put inserted into our mysql tables with the rest of the info. ie, the "connectinfo_start",  "connectinfo_stop" , "acctterminatecause"

 

The following is a STOP detail from the detail log:

 

       NAS-Port = 1458
        NAS-Port-Type = Async
        Called-Station-Id = "3608382437"
        Calling-Station-Id = "3608353229"
        Acct-Status-Type = Stop
        Acct-Authentic = RADIUS
        Service-Type = Framed-User
        Acct-Session-Id = "0002BDAF"
        Framed-Protocol = PPP
        Framed-IP-Address = 209.63.4.246
        X-Ascend-PreSession-Time = 21
        X-Ascend-Pre-Input-Octets = 125
        X-Ascend-Pre-Output-Octets = 111
        X-Ascend-Pre-Input-Packets = 5
        X-Ascend-Pre-Output-Packets = 5
        Acct-Input-Octets = 183894
        Acct-Output-Octets = 10389406
        Acct-Input-Packets = 12222
        Acct-Output-Packets = 19176
        Acct-Session-Time = 3723
        X-Ascend-Disconnect-Cause = 45
        X-Ascend-Data-Rate = 28800
        X-Ascend-Xmit-Rate = 33600
        Acct-Delay-Time = 0

 

 

 

I see the "X-Ascend" codes, but they aren't getting translated properly?   What can I do to have this inserted properly?  All of the dictionary files are current including the cisco and ascend files.  All other columns in the tables are being translated properly...

 

Regards,

 

John Hengstler