Ihm, Christian wrote:
Hello,
I'm testing Freeradius about 4 weeks. I want to implement this product in our firm.
I want to create a user who could make an Dial-In to an Cisco Router 3640 who correspond to an Radius-Server.
I create following config:
* Ritchie Auth-Type := Local, Password == ritch *
* Service-Type = Framed-User, *
* Framed-Protocol = PPP, *
* Cisco-AVPair:="ip_addr-pool=Test", *
* Framed-IP-Netmask = 255.255.255.0, *
* Framed-Routing = Broadcast-Listen, *
* Framed-MTU = 1500, *
* Cisco-AVPair:="ip:dns-servers= xxx.xxx.xxx.xxx", *
* Cisco-AVPair:="ip:wins-servers=xxx.xxx.xxx.xxx", *
* Framed-Compression = Van-Jacobsen-TCP-IP *
* *
I'm running the Radiusd-Daemon in Debug mode -X . When this user dials in the radiusd cleans the string of the address-pool and wrights the wins-serves in
this string too . So the client don't get an ip-address an quit.
Has anyone an idea what the problem is.
It would be very helpfull fo me.
Thanks a lot
Christian Ihm
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
