Hi Artur
Iam sending the server debug output file.
Iam trying to authenticate wireless users with XP system. My userbase is in
LDAP.
Any suggestion will be great. Thanks in advance.
************radiusd -X -A*********************
Listening on IP address *, ports 1812/udp and 1813/udp, with proxy on 1814/udp.
Ready to process requests.
rad_recv: Access-Request packet from host 138.47.102.110:6001, id=13,
length=119
User-Name = "Bob"
NAS-IP-Address = 138.47.102.110
Called-Station-Id = "00-02-2d-47-23-58"
Calling-Station-Id = "00-02-2d-50-a3-f3"
NAS-Identifier = "RadiusAP"
Framed-MTU = 1400
NAS-Port-Type = Wireless-802.11
EAP-Message = "\002\002\000\010\001Bob"
Message-Authenticator = 0x108ee1364eaf6d73afd4fca020f4ce04
modcall: entering group authorize
modcall[authorize]: module "preprocess" returns ok
modcall[authorize]: module "eap" returns updated
users: Matched Bob at 3
modcall[authorize]: module "files" returns ok
modcall: group authorize returns updated
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
modcall: entering group authenticate
rlm_eap: processing type md5
rlm_eap_md5: Issuing Challenge
modcall[authenticate]: module "eap" returns ok
modcall: group authenticate returns ok
Sending Access-Challenge of id 13 to 138.47.102.110:6001
Service-Type = Framed-User
Framed-Protocol = PPP
Framed-Routing = Broadcast-Listen
Framed-MTU = 1750
Framed-Compression = Van-Jacobson-TCP-IP
EAP-Message = "\001\r\000\026\004\020HU\235\272in;q~\373)$\304*\360<"
Message-Authenticator = 0x00000000000000000000000000000000
State =
0xb8544111638aa2094bf37fb63b6e4ddae418813eadd92b7dc38bd585e79b2bb05fce59c2
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
--- Walking the entire request list ---
Cleaning up request 0 ID 13 with timestamp 3e8118e4
Nothing to do. Sleeping until we see a request.
rad_recv: Access-Request packet from host 138.47.102.110:6001, id=14,
length=119
User-Name = "Bob"
NAS-IP-Address = 138.47.102.110
Called-Station-Id = "00-02-2d-47-23-58"
Calling-Station-Id = "00-02-2d-50-a3-f3"
NAS-Identifier = "RadiusAP"
Framed-MTU = 1400
NAS-Port-Type = Wireless-802.11
EAP-Message = "\002\002\000\010\001Bob"
Message-Authenticator = 0x2b66e939f74c34a4a996282607247b8d
modcall: entering group authorize
modcall[authorize]: module "preprocess" returns ok
modcall[authorize]: module "eap" returns updated
users: Matched Bob at 3
modcall[authorize]: module "files" returns ok
modcall: group authorize returns updated
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
modcall: entering group authenticate
rlm_eap: processing type md5
rlm_eap_md5: Issuing Challenge
modcall[authenticate]: module "eap" returns ok
modcall: group authenticate returns ok
Sending Access-Challenge of id 14 to 138.47.102.110:6001
Service-Type = Framed-User
Framed-Protocol = PPP
Framed-Routing = Broadcast-Listen
Framed-MTU = 1750
Framed-Compression = Van-Jacobson-TCP-IP
EAP-Message = "\001\016\000\026\004\020J\347\0236\344K\371
\277y\322u.#H\030\245"
Message-Authenticator = 0x00000000000000000000000000000000
State =
0x8c23059409e8141abbacc10527ed7c20ec18813e310778ff5bce1ea5c9149793b998df93
Finished request 1
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
--- Walking the entire request list ---
Cleaning up request 1 ID 14 with timestamp 3e8118ec
Nothing to do. Sleeping until we see a request.
********************************************************************
Thanks
Reddy [EMAIL PROTECTED]
-------------------------------------------------
This mail sent through IMP: http://horde.org/imp/
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
