Hi Thanks for the response. I have stopped using MD5 for authentication purpose. Now I am shifting towards EAP/TLS, hope this time i dont get any errors.
Thanks for the help Reddy [EMAIL PROTECTED] >hi > >what you've sent is the following: > >eap response identity >md5 challenge >then new eap response identity >and new challenge issued by the server >take a look at the EAP-Message attribute to approve this. > >so, from the server's point of view there was no problem. however, it=20 >never received the necessary response to its challenges. > >thus, the problem is either on your radius client (access device) or at=20 >your user (winXP). what are you trying to do exactly? > > >ciao >artur > > > Narasimha Reddy Gujja wrote: > Hi Artur >=20 > Iam sending the server debug output file.=20 >=20 > Iam trying to authenticate wireless users with XP system. My userbase i= s in=20 > LDAP. >=20 > Any suggestion will be great. Thanks in advance. >=20 > ************radiusd -X -A********************* > Listening on IP address *, ports 1812/udp and 1813/udp, with proxy on 1= 814/udp. > Ready to process requests. > rad_recv: Access-Request packet from host 138.47.102.110:6001, id=3D13,= =20 > length=3D119 > User-Name =3D "Bob" > NAS-IP-Address =3D 138.47.102.110 > Called-Station-Id =3D "00-02-2d-47-23-58" > Calling-Station-Id =3D "00-02-2d-50-a3-f3" > NAS-Identifier =3D "RadiusAP" > Framed-MTU =3D 1400 > NAS-Port-Type =3D Wireless-802.11 > EAP-Message =3D "\002\002\000\010\001Bob" > Message-Authenticator =3D 0x108ee1364eaf6d73afd4fca020f4ce04 > modcall: entering group authorize > modcall[authorize]: module "preprocess" returns ok > modcall[authorize]: module "eap" returns updated > users: Matched Bob at 3 > modcall[authorize]: module "files" returns ok > modcall: group authorize returns updated > rad_check_password: Found Auth-Type EAP > auth: type "EAP" > modcall: entering group authenticate > rlm_eap: processing type md5 > rlm_eap_md5: Issuing Challenge > modcall[authenticate]: module "eap" returns ok > modcall: group authenticate returns ok > Sending Access-Challenge of id 13 to 138.47.102.110:6001 > Service-Type =3D Framed-User > Framed-Protocol =3D PPP > Framed-Routing =3D Broadcast-Listen > Framed-MTU =3D 1750 > Framed-Compression =3D Van-Jacobson-TCP-IP > EAP-Message =3D "\001\r\000\026\004\020HU\235\272in;q~\373)$\30= 4*\360<" > Message-Authenticator =3D 0x00000000000000000000000000000000 > State =3D=20 > 0xb8544111638aa2094bf37fb63b6e4ddae418813eadd92b7dc38bd585e79b2bb05fce5= 9c2 > Finished request 0 > Going to the next request > --- Walking the entire request list --- > Waking up in 6 seconds... > --- Walking the entire request list --- > Cleaning up request 0 ID 13 with timestamp 3e8118e4 > Nothing to do. Sleeping until we see a request. > rad_recv: Access-Request packet from host 138.47.102.110:6001, id=3D14,= =20 > length=3D119 > User-Name =3D "Bob" > NAS-IP-Address =3D 138.47.102.110 > Called-Station-Id =3D "00-02-2d-47-23-58" > Calling-Station-Id =3D "00-02-2d-50-a3-f3" > NAS-Identifier =3D "RadiusAP" > Framed-MTU =3D 1400 > NAS-Port-Type =3D Wireless-802.11 > EAP-Message =3D "\002\002\000\010\001Bob" > Message-Authenticator =3D 0x2b66e939f74c34a4a996282607247b8d > modcall: entering group authorize > modcall[authorize]: module "preprocess" returns ok > modcall[authorize]: module "eap" returns updated > users: Matched Bob at 3 > modcall[authorize]: module "files" returns ok > modcall: group authorize returns updated > rad_check_password: Found Auth-Type EAP > auth: type "EAP" > modcall: entering group authenticate > rlm_eap: processing type md5 > rlm_eap_md5: Issuing Challenge > modcall[authenticate]: module "eap" returns ok > modcall: group authenticate returns ok > Sending Access-Challenge of id 14 to 138.47.102.110:6001 > Service-Type =3D Framed-User > Framed-Protocol =3D PPP > Framed-Routing =3D Broadcast-Listen > Framed-MTU =3D 1750 > Framed-Compression =3D Van-Jacobson-TCP-IP > EAP-Message =3D "\001\016\000\026\004\020J\347\0236\344K\371 > \277y\322u.#H\030\245" > Message-Authenticator =3D 0x00000000000000000000000000000000 > State =3D=20 > 0x8c23059409e8141abbacc10527ed7c20ec18813e310778ff5bce1ea5c9149793b998d= f93 > Finished request 1 > Going to the next request > --- Walking the entire request list --- > Waking up in 6 seconds... > --- Walking the entire request list --- > Cleaning up request 1 ID 14 with timestamp 3e8118ec > Nothing to do. Sleeping until we see a request. >=20 > ******************************************************************** >=20 > Thanks=20 > Reddy [EMAIL PROTECTED] >=20 >=20 >=20 > ------------------------------------------------- > This mail sent through IMP: http://horde.org/imp/ >=20 > -=20 > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/use= rs.html --=20 Artur Hecker D=E9partement Informatique et R=E9seaux, ENST Paris http://www.infres.enst.fr/~hecker ------------------------------------------------- This mail sent through IMP: http://horde.org/imp/ - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
