Hi all,
I can set up freeradius with a static ip address per user but how do you do it so that
it picks an ip address from a pool i.e dynamically?
The kind of user details I've got for static are like the following. What would I
change for it to be dynamic?
test Auth-Type = Local, Password = "testing"
Service-Type = Framed-User,
Framed-Protocol = PPP,
Framed-IP-Address = 192.168.31.152,
Framed-IP-Netmask = 255.255.255.255,
Framed-Routing = Broadcast-Listen,
Framed-Filter-Id = "std.ppp",
Framed-MTU = 1500,
Framed-Compression = Van-Jacobson-TCP-IP
cheers in advance
Rob.
===========================
Netnorth Limited
7-8 Queensbrook
Bolton Technology Exchange
Bolton
BL1 4AY
d/l: 01204 900714
tel: 01204 900700
Fax: 01204 900777
email: [EMAIL PROTECTED]
===========================
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Why not try our dial-up ?
Modem Tel: 0845 055 0006
Username: netnorthdial
Password: netnorthdial
All formats supported, including V90, ISDN, ISDN dual channel, Mobile Phones
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
