Change these two. Framed-IP-Address = 255.255.255.254, Framed-IP-Netmask = 255.255.255.255,
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Robin Garbutt Sent: Tuesday, June 03, 2003 4:09 AM To: [EMAIL PROTECTED] Subject: dynamic ip addresses Hi all, I can set up freeradius with a static ip address per user but how do you do it so that it picks an ip address from a pool i.e dynamically? The kind of user details I've got for static are like the following. What would I change for it to be dynamic? test Auth-Type = Local, Password = "testing" Service-Type = Framed-User, Framed-Protocol = PPP, Framed-IP-Address = 192.168.31.152, Framed-IP-Netmask = 255.255.255.255, Framed-Routing = Broadcast-Listen, Framed-Filter-Id = "std.ppp", Framed-MTU = 1500, Framed-Compression = Van-Jacobson-TCP-IP cheers in advance Rob. =========================== Netnorth Limited 7-8 Queensbrook Bolton Technology Exchange Bolton BL1 4AY d/l: 01204 900714 tel: 01204 900700 Fax: 01204 900777 email: [EMAIL PROTECTED] =========================== ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Why not try our dial-up ? Modem Tel: 0845 055 0006 Username: netnorthdial Password: netnorthdial All formats supported, including V90, ISDN, ISDN dual channel, Mobile Phones ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html --- [This E-mail scanned for viruses at TNWEB LLC] --- [This E-mail scanned for viruses at TNWEB LLC] - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
