Oliver Graf,您好！
Thank's.
I set a User-Password attribute in the users file like this:
"aaa" Auth-Type := System, User-Password == "aaa"
Reply-Message = "Hello, %u"
when I connect to it ,the server said:
Listening on IP address *, ports 1812/udp and 1813/udp, with proxy on 1814/udp.
Ready to process requests.
rad_recv: Access-Request packet from host 192.168.3.210:1812, id=161, length=102
NAS-IP-Address = 192.168.3.210
NAS-Port = 50001
NAS-Port-Type = Ethernet
User-Name = "aaa"
Calling-Station-Id = "52-54-AB-35-BE-DC"
Service-Type = Framed-User
Framed-MTU = 1500
EAP-Message = "\002\002\000\010\001aaa"
Message-Authenticator = 0x9e7143d4121c8326e4c90b2e75f6e9d0
rlm_chap: Could not find proper Chap-Password attribute in request
rlm_unix: Attribute "User-Password" is required for authentication.
Sending Access-Reject of id 161 to 192.168.3.210:1812
Reply-Message = "Hello, %u"
help me ,tks.
======= 2003-06-16 07:26:00 您在来信中写道：=======
>On Mon, Jun 16, 2003 at 08:58:20AM +0800, ?????? wrote:
>> I install the freeradius0.8.1,and only configed the clients.conf,I can't complete
>> the authentication,the error message is :
>>
>> rlm_chap: Could not find proper Chap-Password attribute in request
>> rlm_unix: Attribute "User-Password" is required for authentication.
>>
>> What should I do?
>
>Follow the instructions the error messages gives you?
>
>Set a User-Password attribute for the user you log in with in the
>users file (ldap db, sql db, whatever backend you use to store the
>users).
>
>Oliver.
>
>
>-
>List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
= = = = = = = = = = = = = = = = = = = =
致
礼！
宏桥信息科技（大连）有限公司
电话：0411-4668118-8705传真：0411-4685815
大连市沙河口区连山街123号高技术楼B座8楼（116023）
王振国
[EMAIL
PROTECTED]
2003-06-16
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
