Hi All,
I am stuck at a point while configuring FreeRadius 0.8.1 for a pool of NAS's and
annex's.
I want to give a group of admin users such ip's that they are above
10.0.0.100 and won't be affected by simultaneous-use parameter. My users
and huntgroups file are below (ip's are changed)
users:
-------
DEFAULT Huntgroup-Name=="admin", Auth-Type :=System
User-Service-Type = NAS-Prompt-User,
Framed-IP-Address = 10.0.0.100+,
DEFAULT Auth-Type :=System, BSimultaneous-Use:=1
User-Service-Type = NAS-Prompt-User, Framed-IP-Address = 10.0.0.1+
huntgroups:
-----------
admin NAS-IP-Address == A.B.C.D
User-Name = gunce,
User-Name = gciftci
However, when a user, other than gunce and gciftci logs in to A.B.C.D,
(ahmet logs in) radiusd -X says and gives 10.0.0.100+
..
modcall: entering group authorize
modcall[authorize]: module "preprocess" returns ok
huntgroups: Matched admin at 2
users: Matched DEFAULT at 1
modcall[authorize]: module "files" returns ok
modcall: group authorize returns ok
rad_check_password: Found Auth-Type System
auth: type "System"
modcall: entering group authenticate
modcall[authenticate]: module "unix" returns ok
modcall: group authenticate returns ok
Login OK: [ahmet] (from client ras port 32 cli [03334445566)
Sending Access-Accept of id 149 to A.B.C.D:4504
User-Service-Type = NAS-Prompt-User
Framed-IP-Address = 10.0.0.100+
Finished request 2
..
I could not figure out what is the wrong thing, could anybody point me please?
Is it related with my understanding of huntgroups or users file?
Regards,
- Gunce
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
