On Thu, 2003-06-19 at 10:05, gunce ciftci wrote:
>
> Hi All,
> I am stuck at a point while configuring FreeRadius 0.8.1 for a pool of NAS's and
> annex's.
>
> I want to give a group of admin users such ip's that they are above
> 10.0.0.100 and won't be affected by simultaneous-use parameter. My users
> and huntgroups file are below (ip's are changed)
>
> users:
> -------
> DEFAULT Huntgroup-Name=="admin", Auth-Type :=System
> User-Service-Type = NAS-Prompt-User,
> Framed-IP-Address = 10.0.0.100+,
^
That comma shouldn't be there, can't find any other errors...
Chris
> DEFAULT Auth-Type :=System, BSimultaneous-Use:=1
> User-Service-Type = NAS-Prompt-User, Framed-IP-Address = 10.0.0.1+
>
> huntgroups:
> -----------
> admin NAS-IP-Address == A.B.C.D
> User-Name = gunce,
> User-Name = gciftci
>
>
> However, when a user, other than gunce and gciftci logs in to A.B.C.D,
> (ahmet logs in) radiusd -X says and gives 10.0.0.100+
>
> ..
> modcall: entering group authorize
> modcall[authorize]: module "preprocess" returns ok
> huntgroups: Matched admin at 2
> users: Matched DEFAULT at 1
> modcall[authorize]: module "files" returns ok
> modcall: group authorize returns ok
> rad_check_password: Found Auth-Type System
> auth: type "System"
> modcall: entering group authenticate
> modcall[authenticate]: module "unix" returns ok
> modcall: group authenticate returns ok
> Login OK: [ahmet] (from client ras port 32 cli [03334445566)
> Sending Access-Accept of id 149 to A.B.C.D:4504
> User-Service-Type = NAS-Prompt-User
> Framed-IP-Address = 10.0.0.100+
> Finished request 2
> ..
>
> I could not figure out what is the wrong thing, could anybody point me please?
> Is it related with my understanding of huntgroups or users file?
>
> Regards,
> - Gunce
>
>
>
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
