I'm trying to build FreeRADIUS using the supplied spec file with rpm under SuSE 8.2. When ever I try to build it I get the following.
checking for gdbm.h... no checking for gdbm_open in -lgdbm... no checking for gdbm_fdesc... no configure: error: set --without-rlm_counter to disable it explicitly. configure: error: ./configure failed for src/modules/rlm_counter Bad exit status from /var/tmp/rpm-tmp.42685 (%build) I've even tried building it from the SRPM that Peter has kindly supplied, though unfortunately that has the same problem as the original TGZ. What could be the problem? Rgrds, Alan ------------------------------------------------------------------------------------------------------- This email, and any files transmitted with it, is copyright and may contain confidential information. The contents are intended for the use of the addressee(s) only. Unauthorized use may be unlawful. If you receive this email by mistake, please advise sender immediately. The views of the author may not necessarily constitute the views of Telco Electronics Limited. Nothing in this mail shall bind Telco Electronics Limited in any contract or obligation. Telco Electronics Limited 6-8 Oxford Court Brackley Northants NN13 7XY Tel 07000 701999 Fax 07000 701777 - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
