That just means that you have EAP in your authorization or
authentication configs in FreeRADIUS. If you're not using EAP in the
APs, then you don't need to worry about it. It's just an informational
message in that case. If you want to get rid of those "errors", just
remove the "eap" line from the authorization {} and authentication {}
blocks in the FR config.
--Mike
On Wed, 2003-09-17 at 16:15, Mait Mandel wrote:
> Oops, my misuse of terms.
> But the problem is that i dont know much about EAP and starting to play
> around with freeradius and the Aps i got the following error in
> /usr/local/var/radius/radius.log:
>
> Error: rlm_eap: EAP-Message not found
>
> Where should i go from there?
>
> Mait
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Michael
> Griego
> Sent: 17. september 2003. a. 23:12
> To: [EMAIL PROTECTED]
> Subject: Re: Eap null autent
>
>
> What you wanted was impossible up until the last statement :) You don't
> set up EAP auth in the APs, you set up MAC authentication. In other
> words (AP-2000 speak), your Security Config is "None" and MAC
> Authentication is enabled. Then you can just allow all usernames and
> use the accounting.
>
> --Mike
>
>
> On Wed, 2003-09-17 at 14:38, Mait Mandel wrote:
> > Hi,
> >
> > Does anyone have a configuration with uses EAP (for wireless access
> > points) with null authentication
> > Eg ALL users (mac addresses, actually) are allowed?
> >
> > I'm just not that familiar with freeradius myself and was hoping that
> > someone has already done the work for me :)
> >
> > I want to enable radius accounting for a wifi hotspot, but the Avaya
> > AP3's require for accounting that authentication would be enabled ...
> >
> >
> > Best regards,
> > Mait
> >
> > -
> > List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
--
--Mike
--------------------------------
Michael Griego
Wireless Network Administrator
University of Texas at Dallas
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
