Hi All,

I am trying to setup out multiple tagged tunnel attributes on my
freeradius-0.8.1 running on FreeBSD 4.8, but cannot seem to get the radius
server to send multiple tunnel sets.  The following is the user config file:
============================
DEFAULT                 Suffix == "@starinternet.bddsl.com", Auth-Type :=
Accept
                        Service-Type = Framed-User,
                        Framed-Protocol = PPP,
                        Context-Name = STAR,
                        Tunnel_Local_Name = "STAR",
                        Tunnel_Remote_Name = "STAR",
                        Tunnel-Type:1 = L2TP,
                        Tunnel-Medium-Type:1 = IP,
                        Tunnel-Client-Endpoint:1 = 212.125.88.97,
                        Tunnel-Server-Endpoint:1 = 212.125.88.42,
                        Tunnel-Password:1 = "secret",
                        Tunnel-Assignment-Id:1 = "lac42.bulldog",
                        Tunnel-Preference:1 = 0,
                        Tunnel-Type:2 = L2TP,
                        Tunnel-Medium-Type:2 = IP,
                        Tunnel-Client-Endpoint:2 = 212.125.88.97,
                        Tunnel-Server-Endpoint:2 = 212.125.88.43,
                        Tunnel-Password:2 = "secret",
                        Tunnel-Assignment-Id:2 = "lac43.bulldog",
                        Tunnel-Preference:2 = 0
============================

And the radius accept packet only has the first tunnel set in it:
============================
-su-2.05b# /usr/local/radius/bin/radtest [EMAIL PROTECTED] 1234
127.0.0.1 3841983038  sss
Sending Access-Request of id 119 to 127.0.0.1:1812
        User-Name = "[EMAIL PROTECTED]"
        User-Password = ".\312\\r\003\261\252\273\2424\253`\221\202\326\264"
        NAS-IP-Address = aaa2.bulldogdsl.com
        NAS-Port = 2147483647
rad_recv: Access-Accept packet from host 127.0.0.1:1812, id=119, length=155
        Service-Type = Framed-User
        Framed-Protocol = PPP
        Context-Name = "STAR"
        Tunnel_Local_Name = "STAR"
        Tunnel_Remote_Name = "STAR"
        Tunnel-Type:1 = L2TP
        Tunnel-Medium-Type:1 = IP
        Tunnel-Client-Endpoint:1 = "212.125.88.97"
        Tunnel-Server-Endpoint:1 = "212.125.88.42"
        Tunnel-Password:1 = "secret"
        Tunnel-Assignment-Id:1 = "lac42.bulldog"
        Tunnel-Preference:1 = 0
-su-2.05b# 
============================

Is there anything I need to do to enable this functionality?  The
dictionary.tunnel file has_tagged enable for these attributes.

Any help would be greatly appreciated.

Regards,
-------------
Chee Beng Teoh
Network Engineer
Bulldog Communications
40 Portman Square, London W1H 6LT
Tel   : +44(0)20-7034 3054
Fax   : +44(0)20-7034 4667
Email : [EMAIL PROTECTED]
Web   : http://www.bulldogdsl.com/



************************************************************************

Registered in England, number 4005262, c/o Hogan and Hartson

LLP, One Angel Court, LONDON, EC2R 7HJ United Kingdom


- 
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

Reply via email to