I'm not using mysql yet...
I have the same ssecret set the same in clients, clients.conf, and
naspasswd. I also tried just setting it in clients.conf.
> You do have your ssecret set the same in *both* the radacctable and
> radiustbl, right?
>
> --Mike
>
>
> On Thu, 2003-10-09 at 14:24, Joe Antkowiak wrote:
>> I am using 2.3.1 =(
>>
>> AP-2000 v2.3.1(554) Do I need a new 2.3.1 build?
>>
>> > Upgrade to firmware version 2.3.1. It sounds like you're using
>> firmware
>> > version 2.2.2 which had the problem you describe.
>> >
>> > --Mike
>> >
>> >
>> > On Thu, 2003-10-09 at 13:16, Joe Antkowiak wrote:
>> >> Hi,
>> >>
>> >> I'm stumped.
>> >>
>> >> We have a few orinico AP-2000's that we're trying to set up
>> mac-address
>> >> control through radius.
>> >>
>> >> The authentication works fine. The shared secrets are correct,
>> >> everything's configured right, etc...
>> >>
>> >> Accounting, however, doesn't. When freeradius 0.9.1 (and 0.9.0)
>> >> receives
>> >> an accounting request from any AP2000, it complains that the shared
>> >> secret
>> >> is not the same, and rejects it.
>> >>
>> >> Now, I've read all the e-mails I could find about this, and I've
>> tried
>> >> all
>> >> kinds of things, and I still can't get it to work, with freeradius.
>> >>
>> >> On an off chance, I tried it with cistron radius instead, with
>> basicly
>> >> the
>> >> same exact configuration, and wa-la, everything works!
>> >>
>> >> This is the account record that the AP sends back to radius (as
>> recorded
>> >> by cistron):
>> >> Thu Oct 9 14:06:52 2003
>> >> User-Name = "00-0c-41-0c-f3-ea"
>> >> Acct-Session-Id = "00-0c-41-0c-f3-ea"
>> >> NAS-Identifier = "wolfe-ap1"
>> >> NAS-IP-Address = 66.92.46.190
>> >> NAS-Port = 2
>> >> NAS-Port-Type = 19
>> >> Acct-Authentic = RADIUS
>> >> Acct-Status-Type = Start
>> >> Client-IP-Address = 66.92.46.190
>> >> Timestamp = 1065722812
>> >> Request-Authenticator = Unverified
>> >>
>> >>
>> >> I did however notice the following statistics on the orinoco:
>> >>
>> >> Primary Authentication Server
>> >> Access Requests 1
>> >> Access Accepts 1
>> >> Access Retransmissions 3
>> >> Access Rejects 0
>> >> Access Challenges 0
>> >> Malformed Access Responses 0
>> >> Authentication Bad Authenticators 1 <<< ?
>> >> Timeouts 3
>> >>
>> >> Primary Accounting Server
>> >> Accounting Requests 1
>> >> Accounting Retransmissions 0
>> >> Accounting Responses 1
>> >> Accounting Bad Authenticators 1 <<< ?
>> >>
>> >>
>> >> And any password being passed to radius comes back in a jumbled
>> string
>> >> of
>> >> letters and numbers, about 50 characters long.
>> >>
>> >>
>> >> This is my freeradius config:
>> >>
>> >> clients:
>> >> 66.92.46.190 <<ss>>
>> >>
>> >> clients.conf:
>> >> client 66.92.46.190 {
>> >> secret = <<ss>>
>> >> nastype = portslave
>> >> shortname = wolfe1-ap1
>> >> }
>> >>
>> >> naslist:
>> >> 66.92.46.190 wolfe1-ap1 portslave
>> >>
>> >>
>> >>
>> >> Anyone have any ideas? I'd really like to use freeradius, I want
>> mysql.
>> >>
>> >> Thanks in advance.
>> >>
>> >> -
>> >> List info/subscribe/unsubscribe? See
>> >> http://www.freeradius.org/list/users.html
>> > --
>> >
>> > --Mike
>> >
>> > -----------------------------------
>> > Michael Griego
>> > Wireless LAN Project Manager
>> > The University of Texas at Dallas
>> >
>> >
>> >
>> > -
>> > List info/subscribe/unsubscribe? See
>> > http://www.freeradius.org/list/users.html
>> >
>>
>>
>> -
>> List info/subscribe/unsubscribe? See
>> http://www.freeradius.org/list/users.html
> --
>
> --Mike
>
> -----------------------------------
> Michael Griego
> Wireless LAN Project Manager
> The University of Texas at Dallas
>
>
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
