What NAS-type did you specify though?

> I had to enter the macs in this format 00022d-xxxxxx.  After that it
> worked.
> Peggy
>
> Subject:              Re: Orinoco Shared Key Problem - RE: FR
> and Orinoco AP2000
> From:                 "Joe Antkowiak" <[EMAIL PROTECTED]>
> To:                   [EMAIL PROTECTED]
> Send reply to:        [EMAIL PROTECTED]
> Date sent:            Thu, 9 Oct 2003 15:36:47 -0400 (EDT)
>
>> Tried that too...  is there another one I need to use maybe?  orinoco
>> uses
>> lucent gear...  But would that cause this kind of problem?  What exactly
>> does the NAS-type make radius do differently?
>>
>>
>> > Maybe try changing your NAS type to other?
>> >
>> > --
>> > AA7C EF9F 451F E4AF EB1E 7212 BA37 2882 E813 5B02
>> > --
>> > Jay DeSotel
>> > Systems Administrator
>> > InterLink L.C.
>> > <[EMAIL PROTECTED]>
>> >
>> > On Thu, 9 Oct 2003, Joe Antkowiak wrote:
>> >
>> >> Ok, so I read a little more, and it looks like there is a problem
>> with
>> >> my
>> >> shared secret, on the orinoco side.
>> >>
>> >> I've entered and re-entered the shared secret on the orinoco AP to no
>> >> avail.  Just to make sure it works, I tried this exact config with a
>> >> cisco
>> >> AP and it works fine.
>> >>
>> >> Is there something special I have to do when getting an Orinoco AP to
>> >> talk
>> >> to freeradius, ie to/for the shared key?  What NAS type should I use?
>> >> (Would that have anything to do with this?)
>> >>
>> >> It only authenticates because I have Auth-Type := Accept set on every
>> >> mac
>> >> address user.
>> >>
>> >> -Joe
>> >>
>> >> > Hi,
>> >> >
>> >> > I'm stumped.
>> >> >
>> >> > We have a few orinico AP-2000's that we're trying to set up
>> >> mac-address
>> >> > control through radius.
>> >> >
>> >> > The authentication works fine.  The shared secrets are correct,
>> >> > everything's configured right, etc...
>> >> >
>> >> > Accounting, however, doesn't.  When freeradius 0.9.1 (and 0.9.0)
>> >> receives
>> >> > an accounting request from any AP2000, it complains that the shared
>> >> secret
>> >> > is not the same, and rejects it.
>> >> >
>> >> > Now, I've read all the e-mails I could find about this, and I've
>> tried
>> >> all
>> >> > kinds of things, and I still can't get it to work, with freeradius.
>> >> >
>> >> > On an off chance, I tried it with cistron radius instead, with
>> basicly
>> >> the
>> >> > same exact configuration, and wa-la, everything works!
>> >> >
>> >> > This is the account record that the AP sends back to radius (as
>> >> recorded
>> >> > by cistron):
>> >> > Thu Oct  9 14:06:52 2003
>> >> >         User-Name = "00-0c-41-0c-f3-ea"
>> >> >         Acct-Session-Id = "00-0c-41-0c-f3-ea"
>> >> >         NAS-Identifier = "wolfe-ap1"
>> >> >         NAS-IP-Address = 66.92.46.190
>> >> >         NAS-Port = 2
>> >> >         NAS-Port-Type = 19
>> >> >         Acct-Authentic = RADIUS
>> >> >         Acct-Status-Type = Start
>> >> >         Client-IP-Address = 66.92.46.190
>> >> >         Timestamp = 1065722812
>> >> >         Request-Authenticator = Unverified
>> >> >
>> >> >
>> >> > I did however notice the following statistics on the orinoco:
>> >> >
>> >> > Primary Authentication Server
>> >> > Access Requests 1
>> >> > Access Accepts 1
>> >> > Access Retransmissions 3
>> >> > Access Rejects 0
>> >> > Access Challenges 0
>> >> > Malformed Access Responses 0
>> >> > Authentication Bad Authenticators 1   <<<  ?
>> >> > Timeouts 3
>> >> >
>> >> > Primary Accounting Server
>> >> > Accounting Requests 1
>> >> > Accounting Retransmissions 0
>> >> > Accounting Responses 1
>> >> > Accounting Bad Authenticators 1   <<<  ?
>> >> >
>> >> >
>> >> > And any password being passed to radius comes back in a jumbled
>> string
>> >> of
>> >> > letters and numbers, about 50 characters long.
>> >> >
>> >> >
>> >> > This is my freeradius config:
>> >> >
>> >> > clients:
>> >> > 66.92.46.190           <<ss>>
>> >> >
>> >> > clients.conf:
>> >> > client 66.92.46.190 {
>> >> >         secret          = <<ss>>
>> >> >         nastype         = portslave
>> >> >         shortname       = wolfe1-ap1
>> >> > }
>> >> >
>> >> > naslist:
>> >> > 66.92.46.190            wolfe1-ap1      portslave
>> >> >
>> >> >
>> >> >
>> >> > Anyone have any ideas?  I'd really like to use freeradius, I want
>> >> mysql.
>> >> >
>> >> > Thanks in advance.
>> >> >
>> >> > -
>> >> > List info/subscribe/unsubscribe? See
>> >> > http://www.freeradius.org/list/users.html
>> >> >
>> >>
>> >>
>> >> -
>> >> List info/subscribe/unsubscribe? See
>> >> http://www.freeradius.org/list/users.html
>> >>
>> >
>> >
>> > -
>> > List info/subscribe/unsubscribe? See
>> > http://www.freeradius.org/list/users.html
>> >
>>
>>
>> -
>> List info/subscribe/unsubscribe? See
>> http://www.freeradius.org/list/users.html
>
>
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>


-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

Reply via email to