Do you have this on your clients.conf file ?
client 127.0.0.1 {
secret = test
shortname = localhost
nastype = other # localhost isn't usually a NAS...
}
Without this, radius will reject packets from localhost.
[]�s
Marcio
----- Original Message -----
From: "Rob Hinst" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, November 15, 2003 12:03 AM
Subject: freeradius + mysql problems
> Hi all,
>
>
> My goal is to use Freeradius with the sql module for authenticating
> users. I'm using version 0.9.2 (installed from rpms i created with the
> specfile that came with the tarball). There doesn't seem to be a wealth
> of information available for using the sql module, but I've been working
> off of this tutorial: http://www.frontios.com/freeradius.html
>
> I got everything working using /etc/shadow to authenticate users, but
> then I proceeded to follow the instructions for sql and have run in to
> some trouble. I followed all of the required steps and am unable to
> authenticate. I'm using the following command to test the server:
>
> radtest robtest test localhost 0 testing123
>
> and i get the following result:
>
> Sending Access-Request of id 170 to 127.0.0.1:1812
> User-Name = "robtest"
> User-Password = "test"
> NAS-IP-Address = radius.mydomain.com (changed the domain)
> NAS-Port = 0
> rad_recv: Access-Reject packet from host 127.0.0.1:1812, id=170,
> length=20
>
>
>
> Here is a snippet of the output produced when i run in debug mode:
>
> rad_recv: Access-Request packet from host 127.0.0.1:32819, id=170,
> length=59
> User-Name = "robtest"
> User-Password = "test"
> NAS-IP-Address = 255.255.255.255
> NAS-Port = 0
> modcall: entering group authorize for request 0
> modcall[authorize]: module "preprocess" returns ok for request 0
> radius_xlat: ''
> modcall[authorize]: module "sql" returns fail for request 0
> modcall: group authorize returns fail for request 0
> There was no response configured: rejecting request 0
> Server rejecting request 0.
>
>
> And here's the only entry in my radcheck table:
>
> +----+----------+-----------+----+-------+
> | id | UserName | Attribute | op | Value |
> +----+----------+-----------+----+-------+
> | 1 | robtest | Password | == | test |
> +----+----------+-----------+----+-------+
>
>
>
> Debug mode doesn't seem to provide very verbose output when it comes
> time to call the sql module. I turned on sqltrace in my sql module
> configuration file, but no queries are showing up. I even turned on
> query logging on my MySQL server and none show up, which means it's not
> even getting to the part where it tries to find a matching user in the
> radcheck table. What could be preventing it from getting it that far?
>
> Any suggestions would be greatly appreciated. I've been working on this
> for several days now and haven't made much progress. I hope I've done
> enough footwork on my own to keep away the flames :)
>
>
> Thanks in advance,
>
> Rob
>
>
> -
> List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
>
>
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
