Hi Marcio,
Actually, my clients.conf file has the following entry, since the secret
i was using with radtest is "testing123" and not "test":
client 127.0.0.1 {
secret = testing123
shortname = localhost
nastype = other # localhost isn't usually a NAS...
}
Thanks for the response. Any other takers?
Rob
On Sat, 2003-11-15 at 08:35, Marcio R A Garcia wrote:
> Do you have this on your clients.conf file ?
>
>
> client 127.0.0.1 {
> secret = test
> shortname = localhost
> nastype = other # localhost isn't usually a NAS...
> }
>
>
> Without this, radius will reject packets from localhost.
>
>
> []Âs
>
>
> Marcio
>
>
> ----- Original Message -----
> From: "Rob Hinst" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Saturday, November 15, 2003 12:03 AM
> Subject: freeradius + mysql problems
>
>
> > Hi all,
> >
> >
> > My goal is to use Freeradius with the sql module for authenticating
> > users. I'm using version 0.9.2 (installed from rpms i created with the
> > specfile that came with the tarball). There doesn't seem to be a wealth
> > of information available for using the sql module, but I've been working
> > off of this tutorial: http://www.frontios.com/freeradius.html
> >
> > I got everything working using /etc/shadow to authenticate users, but
> > then I proceeded to follow the instructions for sql and have run in to
> > some trouble. I followed all of the required steps and am unable to
> > authenticate. I'm using the following command to test the server:
> >
> > radtest robtest test localhost 0 testing123
> >
> > and i get the following result:
> >
> > Sending Access-Request of id 170 to 127.0.0.1:1812
> > User-Name = "robtest"
> > User-Password = "test"
> > NAS-IP-Address = radius.mydomain.com (changed the domain)
> > NAS-Port = 0
> > rad_recv: Access-Reject packet from host 127.0.0.1:1812, id=170,
> > length=20
> >
> >
> >
> > Here is a snippet of the output produced when i run in debug mode:
> >
> > rad_recv: Access-Request packet from host 127.0.0.1:32819, id=170,
> > length=59
> > User-Name = "robtest"
> > User-Password = "test"
> > NAS-IP-Address = 255.255.255.255
> > NAS-Port = 0
> > modcall: entering group authorize for request 0
> > modcall[authorize]: module "preprocess" returns ok for request 0
> > radius_xlat: ''
> > modcall[authorize]: module "sql" returns fail for request 0
> > modcall: group authorize returns fail for request 0
> > There was no response configured: rejecting request 0
> > Server rejecting request 0.
> >
> >
> > And here's the only entry in my radcheck table:
> >
> > +----+----------+-----------+----+-------+
> > | id | UserName | Attribute | op | Value |
> > +----+----------+-----------+----+-------+
> > | 1 | robtest | Password | == | test |
> > +----+----------+-----------+----+-------+
> >
> >
> >
> > Debug mode doesn't seem to provide very verbose output when it comes
> > time to call the sql module. I turned on sqltrace in my sql module
> > configuration file, but no queries are showing up. I even turned on
> > query logging on my MySQL server and none show up, which means it's not
> > even getting to the part where it tries to find a matching user in the
> > radcheck table. What could be preventing it from getting it that far?
> >
> > Any suggestions would be greatly appreciated. I've been working on this
> > for several days now and haven't made much progress. I hope I've done
> > enough footwork on my own to keep away the flames :)
> >
> >
> > Thanks in advance,
> >
> > Rob
> >
> >
> > -
> > List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
> >
> >
>
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
