Hi Artur, Thanks for the info about the EAPOL packets. I've installed the latest drivers both for the AP and the pcmcia card. It seems that the AP340 has a bug(?:( Is there any website of Cisco where I can post my question?
Thanks, Marios -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Artur Hecker Sent: Wednesday, November 19, 2003 1:28 AM To: [EMAIL PROTECTED] Subject: Re: malformed EAPOL-Key with LEAP and AEGIS Client hi > I'm using WEP enabled mode where I get 2 EAPOL-Keys with the second > malformed from the AP-340 !!! I use also AEGIS client in Windows XP > Home. before you continue: do you use the latest versions of the firmware on both your AP _and_ your wifi card? > I've attached the ethereal dumps to check what exactly I mean. I don't > know if it is a bug in the AP or the freeradius, but I suspect that > the freeradius doesn't construct well the second EAPOL-Key message and > the AP forwards a malformed packet. freeradius does not construct any EAPOL frames at all. it only sends keys to the access point and those are used by the AP to derive all the rest. whatever freeradius might have done wrong with the key material which it provides to the AP, it can't EVER be the reason for a malformed EAPOL packet. only your AP and the card are speaking EAPOL. search there. ciao artur ps i didn't check your logs yet - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
