Artur, Have you checked if the last EAPOL-Key is malformed. It works fine for me too even if the packet is not correct !! I tried to pass traffic with WEP enabled and I didn't have any problem, but I don't know if this packet should be malformed anyway!! Could you please try to pass traffic using LEAP method and WEP enabled?
I would love to send me an ethereal sniff ! Thanks, Marios -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Artur Hecker Sent: Wednesday, November 19, 2003 5:00 PM To: [EMAIL PROTECTED] Subject: Re: malformed EAPOL-Key with LEAP and AEGIS Client hi > Thanks for the info about the EAPOL packets. I've installed the latest > drivers both for the AP and the pcmcia card. It seems that the AP340 > has a bug(?:( Is there any website of Cisco where I can post my > question? i've been using an AP340 with the 12T release for a quite a while now and i don't have this problem. i'm using freeradius with EAP/TLS and rotating wep keys. ciao artur - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
