Thank you Chris Parker for your prior assistance.
Authentication on my RADIUS server was successful but the Telnet prompt to my target Unix box still does not appear on the user's PC, with user setup;
>usertest Auth-Type := Local, User-Password == "testunix" > Service-Type = Login-User, > Login-Service = Telnet, > Login-TCP-Port = Telnet, > Login-IP-Host = 192.168.212.43
Then, I used Hyperterminal to dial into my service provider's RADIUS client and manually entered the required Login and Password and got the following in my Hyperterminal window;
Welcome to RADIUS Client Service
login: usertest password: ******** Please hold ... Authenticated.
But the Telnet prompt for the target Unix box 192.168.212.43
SunOS 5.6
login:
does not appear after 'Authenticated'. What may be wrong considering the debug info below which includes starting the RADIUS server and (******>>>>>) the attempt to connect using Hyperterminal;
What do you show on your Term Server?
What does 'snoop x.y.z.a' on your Sun box show ( where x.y.z.a is the ip address of your Term Server ).
The above profile works on Cisco, Ascend, Lucent, and Livingston hardware, as I'm using it today. If it doens't work on your term server, then you have config issue ( perhaps not allowing telnet ) somewhere on the term server or the Sun server.
-Chris -- \\\|||/// \ StarNet Inc. \ Chris Parker \ ~ ~ / \ WX *is* Wireless! \ Director, Engineering | @ @ | \ http://www.starnetwx.net \ (847) 963-0116 oOo---(_)---oOo--\------------------------------------------------------ \ Wholesale Internet Services - http://www.megapop.net
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
