On Wed, Jan 14, 2004 at 01:41:53AM +0100, Albert Silva Gibert wrote: > > I need to configure static IP for the WinXP supplicant from the FreeRadius > through a Cisco 3550 switch. > > I don't know what I'm missing!!! All the authentication works correct with > EAP MD5, the only think that fails is de assignement of the user IP. My > users file looks like this: > > user Auth-Type := EAP, User-Password == "userpsw" > Reply-Message = "Hi user!!!", > Service-Type = Framed-User, > Framed-Protocol = PPP, > Framed-IP-Address = 33.33.33.2, > Framed-IP-Netmask = 255.255.255.0,
Here you assign the network 33.33.33.0/24 to the user. His interface gets 33.33.33.2 as ip in this network, which gets routed to this IP. > interface Vlan1 > ip address 33.33.33.1 255.255.255.0 But wait! Your cisco has an interface in this network! Won't work. The cisco will not accept the routing information you did send in your radius paket. So the user should get droppen. If you just want to try to assign one IP, please read the FAQ and do not use a netmask, cause this is propably not what you want... Oliver. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
