Dear Sir,
We are doing a project titled "Integrating Mobile IP for
Authentication, Authorization and Accounting over RADIUS". We
are using the software "Dynamics - Mobile IP" developed at
Helsinki University of Technology
(http://dynamics.sourceforge.net). Since we have hardware
limitations, we are implementing Mobile IP in a wired
environment.
We have 3 computers running Red Hat Linux 7.3, connected
through a 2 hubs
Home agent HA -> 172.168.242.1 (eth0) & 172.168.240.5 (eth1)
Foreign Agent FA -> 172.168.240.1
Mobile Node MN -> 172.168.242.2 (initial setup ) -> 172.168.240.2
(final point of attachment)
RADIUS -> 172.168.242.5 ( YEHAOOOOOO..HELPPPP)
Our initial setup is
HA (172.168.242.1 eth0) --hub-- MN (172.168.242.2)
|
RADIUS
Final setup is
RADIUS--hub--HA(172.168.240.5
eth1)--hub--FA(172.168.240.1)-- MN (172.168.242.2)
|
|
HA (172.168.242.1 eth0)
We are simulating the movement of mobile node from one
network to another in a wired environment by changing the
IP address of MN manually (without DHCP).
THE HELP WE REQUIRE!!!!!!!!!!!!!...
we need radius to authenticate the Homeagent.
1. how do we change configuration in radius to accept the homeagent and
validate it?
2. Do we need to install the radius program in the homeagent also in
order to run programs like radclient?
CHEERS !!!
Haarith R Devarajan
--
Haarith Devarajan
[EMAIL PROTECTED]
--
http://www.fastmail.fm - Or how I learned to stop worrying and
love email again
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
