Thanks for taking the time to look at this, Alan. This is the leap client HP has available for download for the iPAQ 5450 on their website. Sounds like they should fix their client.
In any case, I created a special build of freeradius that works with the HP client and was able to complete my testing. Thanks for pointing me in the right direction. - Derek On 20-Feb-2004 22:17 Alan DeKok wrote: | Derek Orpen <[EMAIL PROTECTED]> wrote: | > The AP responds correctly to the first challenge sent by freeradius. | > But freeradius doesn't seem to know what to do with the challenge | > from the AP. | | The AP isn't sending challenges... | | > Sending Access-Challenge of id 231 to 209.47.155.132:1255 | > EAP-Message = 0x03030004 | > Message-Authenticator = 0x00000000000000000000000000000000 | > State = 0xa0c5f9550e7600ebdc8e2ea363823f9d | > Finished request 22 | | Note the "0x0303" from the EAP-Message. It indicates EAP success, | and an sequence number of 3. | | > rad_recv: Access-Request packet from host 209.47.155.132:1256, id=232, | > length=179 | .... | > State = 0xa0c5f9550e7600ebdc8e2ea363823f9d | ... | > EAP-Message = 0x010000161101000889df7f1f20328e24646f7270656e | | The State is OK. That's good. The EAP-Message starts off with | "0x0100", which looks like the correct EAP packet type (1), but the | wrong sequence number (0). The client SHOULD have responded with a | sequence number of 4, I think. At least, that's what the Cisco | clients do. | | > rlm_eap: Request not found in the list | > rlm_eap: Either EAP-request timed out OR EAP-response to an unknown | > EAP-request | | And the EAP module doesn't see a sequence number of 4, so it ignores | the request. | | It should be possible to fix the server to be a little more | forgiving, but my first question is why does that LEAP client do | something different from every other LEAP client... | | Alan DeKok. | | - | List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
