Dear all,
I'm trying to configure
WindowsXP <-- wireless-> Cisco AP1100 <--> FreeRadius
with MD5 authentication following
http://lists.cistron.nl/pipermail/freeradius-users/2002-August/009532.html
The version of FreeRadius:
radiusd: FreeRADIUS Version 0.9.3, for host i686-pc-linux-gnu, built on Feb
17 2004 at 16:54:51
My WindowsXP client settings are :
Connection properties ->
Authentication : Enable IEEE 802.1x ...
EAP type PEAP (the other option is Smart Card or Cetificate)
Properties ->
Select Auth. Method: EAP-MSCHAP-v2 (the othe options is Smart Card
or Cetificate)
This is my freeradius debug:
Waking up in 2 seconds...
rad_recv: Access-Request packet from host 192.168.4.5:21645, id=83,
length=123
User-Name = "user3"
Framed-MTU = 1400
Called-Station-Id = "0002.8a0e.33c0"
Calling-Station-Id = "0090.9660.5c87"
Message-Authenticator = 0x2ce00fea6464f1816607e046a7140288
EAP-Message = 0x0201000a017573657233
NAS-Port-Type = Wireless-802.11
NAS-Port = 350
Service-Type = Framed-User
NAS-IP-Address = 192.168.4.5
NAS-Identifier = "ap"
modcall: entering group authorize for request 6
modcall[authorize]: module "preprocess" returns ok for request 6
rlm_eap: EAP packet type notification id 1 length 10
rlm_eap: EAP Start not found
modcall[authorize]: module "eap" returns updated for request 6
users: Matched user3 at 92
modcall[authorize]: module "files" returns ok for request 6
modcall: group authorize returns updated for request 6
rad_check_password: Found Auth-Type Local
auth: type Local
auth: No User-Password or CHAP-Password attribute in the request
auth: Failed to validate the user.
Delaying request 6 for 1 seconds
Finished request 6
Going to the next request
Waking up in 2 seconds...
--- Walking the entire request list ---
Cleaning up request 5 ID 82 with timestamp 403d3097
Sending Access-Reject of id 83 to 192.168.4.5:21645
My users file record is just:
user3 Auth-Type := Local, User-Password == "cisco"
I believe that the problem is here:
-----
auth: type Local
auth: No User-Password or CHAP-Password attribute in the request
auth: Failed to validate the user.
----
but I cannot guess what is missing in my configuration ?!
Any ideas ?
Best,
Nedialko
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
