On Sun, 14 Mar 2004, Schalk Erasmus - IGN wrote:
> Well, if it was a NAS problem, which it is NOT....then Analog Users would
> not be able to Authenticate correctly.
in your radius config you are using a cisco av-pair to indicate which ip
address pool your isdn users will be using (hopefully that is configured
on the access server). you do not have this config on your async config..
------
isdn password == "isdn", Simultaneous-Use = 2
Service-Type = Framed-User,
Framed-Protocol = PPP,
Framed-IP-Address = 255.255.255.254,
Framed-IP-Netmask = 255.255.255.255,
Framed-Routing = Broadcast,
Framed-Compression = None,
Port-Limit = 2,
Framed-MTU = 1500,
cisco-avpair="ip:addr-pool=cyberh"
# Analog users
DEFAULT Fall-Through = Yes
test Password = "test123", NAS-Port-Type = Async
Service-Type = Framed-User,
Framed-Protocol = PPP,
Framed-IP-Address = 255.255.255.254,
Framed-IP-Netmask = 255.255.255.255,
Framed-Routing = Broadcast,
Framed-MTU = 1500
---------------------------
i still say nas.
j.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
