Hello,
I use freeradius 0.9.3 on a Rehdat 9.0 box.
I would like to authenticate from winXP (SP1 with all patches).
My test user is in user file :
criup Auth-Type := EAP, User-Password == "mypass"
eap is configured in sections modules, authorize an authenticate ( default
config).
My wireless card is a cisco aironet 802.11 abg that connect an AP cisco
aironet 1100.
I searched all archives and documentations without success.
my debug is :
rad_recv: Access-Request packet from host 192.168.200.154:21733, id=96,
length=162
User-Name = "criup"
Framed-MTU = 1400
Called-Station-Id = "000f.34a6.5400"
Calling-Station-Id = "0040.96a1.8d33"
Message-Authenticator = 0xb560044f371b37da8a4f47bdea830755
EAP-Message = 0x020600060319
NAS-Port-Type = Wireless-802.11
NAS-Port = 430
State =
0x94e83c4f0161a127188534bbf1e614020c7159403e7e8b6273e47bbe24009c81d1dc2e7f
Service-Type = Framed-User
NAS-IP-Address = 192.168.200.154
NAS-Identifier = "ap-SBHX"
modcall: entering group authorize for request 9383
modcall[authorize]: module "preprocess" returns ok for request 9383
modcall[authorize]: module "chap" returns noop for request 9383
rlm_eap: EAP packet type notification id 6 length 6
rlm_eap: EAP Start not found
modcall[authorize]: module "eap" returns updated for request 9383
modcall[authorize]: module "digest" returns noop for request 9383
rlm_realm: No '@' in User-Name = "criup", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 9383
users: Matched DEFAULT at 152
users: Matched DEFAULT at 171
users: Matched criup at 216
modcall[authorize]: module "files" returns ok for request 9383
modcall[authorize]: module "mschap" returns noop for request 9383
modcall: group authorize returns updated for request 9383
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
modcall: entering group authenticate for request 9383
rlm_eap: EAP packet type notification id 6 length 6
rlm_eap: EAP Start not found
rlm_eap: Request not found in the list
rlm_eap: Either EAP-request timed out OR EAP-response to an unknown
EAP-request
modcall[authenticate]: module "eap" returns invalid for request 9383
modcall: group authenticate returns invalid for request 9383
auth: Failed to validate the user.
Login incorrect: [criup/<no User-Password attribute>] (from client ap-sbhx
port 430 cli 0040.96a1.8d33)
Any idea?
Many thanks in advance.
stephane BRANCHOUX
Centre de Ressources Informatiques de l'Universit� de Perpignan.
Syst�mes/R�seaux
mailto:[EMAIL PROTECTED]
04 68 66 21 24
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
