Yup - they are on the same line. Sorry about that misleading wrapping
DEFAULT Huntgroup-Name == dialup, Ldap-Group == "cn=Dialup,ou=Remote
Access,dc=kensfoods,dc=com"
Fall-Through = yes
DEFAULT Huntgroup-Name == wireless, Ldap-Group == "cn=Wireless,ou=Remote
Access,dc=kensfoods,dc=com"
Fall-Through = yes
On Fri, 26 Mar 2004, Dustin Doris wrote:
> Hmm, is your Ldap-Group statement on the same line as DEFAULT? If not,
> try it without a line break.
>
> DEFAULT Huntgroup-Name == dialup, Ldap-Group == "cn=Dialup,ou=Remote
> Access,dc=kensfoods,dc=com"
> Fall-Through = no
>
>
> On Fri, 26 Mar 2004, Casey Forbes wrote:
>
> > Hm. That doesn't work either.
> >
> > rad_recv: Access-Request packet from host 127.0.0.1:40210, id=122, length=59
> > User-Name = "cforbes"
> > User-Password =
> > NAS-IP-Address = 255.255.255.255
> > NAS-Port = 0
> > Processing the authorize section of radiusd.conf
> > modcall: entering group authorize for request 2
> > modcall[authorize]: module "preprocess" returns ok for request 2
> > modcall[authorize]: module "chap" returns noop for request 2
> > modcall[authorize]: module "mschap" returns noop for request 2
> > rlm_realm: No '@' in User-Name = "cforbes", looking up realm NULL
> > rlm_realm: No such realm "NULL"
> > modcall[authorize]: module "suffix" returns noop for request 2
> > rlm_eap: No EAP-Message, not doing EAP
> > modcall[authorize]: module "eap" returns noop for request 2
> > users: Matched DEFAULT at 67
> > modcall[authorize]: module "files" returns ok for request 2
> > rlm_ldap: - authorize
> > rlm_ldap: performing user authorization for cforbes
> > radius_xlat: '(uid=cforbes)'
> > radius_xlat: 'ou=Users,dc=kensfoods,dc=com'
> > ldap_get_conn: Got Id: 0
> > rlm_ldap: performing search in ou=Users,dc=kensfoods,dc=com, with filter
> > (uid=cforbes)
> > rlm_ldap: looking for check items in directory...
> > rlm_ldap: Adding acctFlags as SMB-Account-CTRL-TEXT, value [U & op=21
> > rlm_ldap: Adding ntPassword as NT-Password, value
> > rlm_ldap: Adding lmPassword as LM-Password, value
> > rlm_ldap: looking for reply items in directory...
> > rlm_ldap: user cforbes authorized to use remote access
> > ldap_release_conn: Release Id: 0
> > modcall[authorize]: module "ldap" returns ok for request 2
> > modcall: group authorize returns ok for request 2
> > rad_check_password: Found Auth-Type Reject
> > rad_check_password: Auth-Type = Reject, rejecting user
> > auth: Failed to validate the user.
> > Login incorrect: [cforbes] (from client localhost port 0)
> > Delaying request 2 for 1 seconds
> > Finished request 2
> > Going to the next request
> >
> >
> >
> >
> > On Fri, 26 Mar 2004, Dustin Doris wrote:
> >
> > > Try setting Fall-Through to no and putting a reject at the bottom of the
> > > file.
> > >
> > > DEFAULT Huntgroup-Name == dialup,
> > > Ldap-Group == "cn=Dialup,ou=Remote Access,dc=kensfoods,dc=com"
> > > Fall-Through = no
> > >
> > > DEFAULT Huntgroup-Name == wireless,
> > > Ldap-Group == "cn=Wireless,ou=Remote Access,dc=kensfoods,dc=com"
> > > Fall-Through = no
> > >
> > > DEFAULT Auth-Type := Reject
> > >
> > >
> > >
> > >
> > > On Fri, 26 Mar 2004, Casey Forbes wrote:
> > >
> > > > Hello,
> > > >
> > > > I'm having a lot of trouble getting my freeradius (CVS snap 20040323)
> > > > to Allow/Deny access based on membership in LDAP groups (where the
> > > > group names are associated with huntgroups). rlm_ldap docs and the mailing
> > > > list archive didn't help me much..
> > > >
> > > > I'd like to do something like this:
> > > >
> > > > huntgroups:
> > > > .....
> > > > dialup NAS-IP-Address == 172.16.0.12
> > > > wireless NAS-IP-Address == 172.16.0.13
> > > >
> > > >
> > > > users:
> > > > .....
> > > > DEFAULT Huntgroup-Name == dialup,
> > > > Ldap-Group == "cn=Dialup,ou=Remote Access,dc=kensfoods,dc=com"
> > > > Fall-Through = yes
> > > > DEFAULT Huntgroup-Name == wireless,
> > > > Ldap-Group == "cn=Wireless,ou=Remote Access,dc=kensfoods,dc=com"
> > > > Fall-Through = yes
> > > >
> > > >
> > > > ldif:
> > > > .....
> > > > dn: cn=Dialup,ou=Remote Access, dc=kensfoods,dc=com
> > > > objectClass: groupOfUniqueNames
> > > > objectClass: top
> > > > uniqueMember: cn=John Smith,ou=Users,dc=kensfoods,dc=com
> > > > cn: Dialup
> > > >
> > > > dn: cn=Wireless,ou=Remote Access, dc=kensfoods,dc=com
> > > > objectClass: groupOfUniqueNames
> > > > objectClass: top
> > > > uniqueMember: cn=Robert Kelley,ou=Users,dc=kensfoods,dc=com
> > > > cn: Wireless
> > > >
> > > >
> > > > radiusd.conf
> > > > .....
> > > > modules {
> > > > ...
> > > >
> > > > ldap {
> > > > server = "ldap.kensfoods.com"
> > > > identity = "cn=FreeRADIUS,ou=Daemon,dc=kensfoods,dc=com"
> > > > password = ******
> > > > basedn = "ou=Users,dc=kensfoods,dc=com"
> > > > filter = "(uid=%u)"
> > > >
> > > > start_tls = no
> > > > ldap_connections_number = 5
> > > > dictionary_mapping = ${raddbdir}/ldap.attrmap
> > > >
> > > > password_header = "{SHA}"
> > > > password_attribute = userPassword
> > > >
> > > > groupname_attribute = cn
> > > > groupmembership_filter =
> > > > "(&(objectClass=groupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))"
> > > >
> > > > timeout = 4
> > > > timelimit = 3
> > > > net_timeout = 1
> > > > compare_check_items = no
> > > > }
> > > > }
> > > > authorize {
> > > > preprocess
> > > > chap
> > > > mschap
> > > > suffix
> > > > eap
> > > > files
> > > > ldap
> > > > }
> > > >
> > > > authenticate {
> > > > Auth-Type PAP {
> > > > pap
> > > > }
> > > > Auth-Type CHAP {
> > > > chap
> > > > }
> > > > Auth-Type MS-CHAP {
> > > > mschap
> > > > }
> > > > Auth-Type LDAP {
> > > > ldap
> > > > }
> > > > eap
> > > > }
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > With the above configuration, no group checks are happening....
> > > >
> > > > radiusd -X
> > > > .....
> > > > rad_recv: Access-Request packet from host 127.0.0.1:40092, id=100,
> > > > length=59
> > > > User-Name = "cforbes"
> > > > User-Password =
> > > > NAS-IP-Address = 255.255.255.255
> > > > NAS-Port = 1
> > > > Processing the authorize section of radiusd.conf
> > > > modcall: entering group authorize for request 0
> > > > modcall[authorize]: module "preprocess" returns ok for request 0
> > > > modcall[authorize]: module "chap" returns noop for request 0
> > > > modcall[authorize]: module "mschap" returns noop for request 0
> > > > rlm_realm: No '@' in User-Name = "cforbes", looking up realm NULL
> > > > rlm_realm: No such realm "NULL"
> > > > modcall[authorize]: module "suffix" returns noop for request 0
> > > > rlm_eap: No EAP-Message, not doing EAP
> > > > modcall[authorize]: module "eap" returns noop for request 0
> > > > modcall[authorize]: module "files" returns notfound for request 0
> > > > rlm_ldap: - authorize
> > > > rlm_ldap: performing user authorization for cforbes
> > > > radius_xlat: '(uid=cforbes)'
> > > > radius_xlat: 'ou=Users,dc=kensfoods,dc=com'
> > > > ldap_get_conn: Got Id: 0
> > > > rlm_ldap: attempting LDAP reconnection
> > > > rlm_ldap: (re)connect to ldap.kensfoods.com:389, authentication 0
> > > > rlm_ldap: bind as cn=FreeRADIUS,ou=Daemon,dc=kensfoods,dc=com
> > > > to ldap.kensfoods.com:389
> > > > rlm_ldap: waiting for bind result ...
> > > > rlm_ldap: Bind was successful
> > > > rlm_ldap: performing search in ou=Users,dc=kensfoods,dc=com, with filter
> > > > (uid=cforbes)
> > > > rlm_ldap: looking for check items in directory...
> > > > rlm_ldap: Adding acctFlags as SMB-Account-CTRL-TEXT
> > > > rlm_ldap: Adding ntPassword as NT-Password
> > > > rlm_ldap: Adding lmPassword as LM-Password
> > > > rlm_ldap: looking for reply items in directory...
> > > > rlm_ldap: user cforbes authorized to use remote access
> > > > ldap_release_conn: Release Id: 0
> > > > modcall[authorize]: module "ldap" returns ok for request 0
> > > > modcall: group authorize returns ok for request 0
> > > > rad_check_password: Found Auth-Type LDAP
> > > > auth: type "LDAP"
> > > > Processing the authenticate section of radiusd.conf
> > > > modcall: entering group Auth-Type for request 0
> > > > rlm_ldap: - authenticate
> > > > rlm_ldap: login attempt by "cforbes" with password
> > > > rlm_ldap: user DN: cn=Casey Forbes,ou=Users,dc=kensfoods,dc=com
> > > > rlm_ldap: (re)connect to ldap.kensfoods.com:389, authentication 1
> > > > rlm_ldap: bind as cn=Casey Forbes,ou=Users,dc=kensfoods,dc=com to
> > > > ldap.kensfoods.com:389
> > > > rlm_ldap: waiting for bind result ...
> > > > rlm_ldap: Bind was successful
> > > > rlm_ldap: user cforbes authenticated succesfully
> > > > modcall[authenticate]: module "ldap" returns ok for request 0
> > > > modcall: group Auth-Type returns ok for request 0
> > > > Login OK: [cforbes] (from client localhost port 1)
> > > > Sending Access-Accept of id 100 to 127.0.0.1:40092
> > > > Finished request 0
> > > >
> > > > -
> > > > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
> > > >
> > >
> > > -
> > > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
> > >
> >
> > -
> > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
> >
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
