I can see from searching the mailing list that this has been asked many times, but what I can't seem to locate are config examples or a good howto on setting everything up. I have the radius server set up -- and it appears to work on, but I am not sure what I am lacking/doing wrong on the AP. I have followed the instructions from the following URL: http://www.impossiblereflex.com/8021x/eap-tls-HOWTO.htm It's a very good guide -- although outdated, I was still able to get the radius and client side configured. What I see now are no requests from the AP to the radius server when I boot up the laptop. The laptop is not able to get to the AP either. I also have LDAP auth turned on, when I telnet to the AP the LDAP piece communicates fine with the radius server so I know the comms are ok.
Does anyone have an example 1100AP config that I can use? Regards, Clayton Dukes CCNA, CCDA, CCNP, CCDP Sr. Network Engineer E Solutions Corp. http://www.esnet.com 813.301.2620 (o) 813.545.7373 (c) - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
