Hi!
I've installed freeradius-snapshot-20040419 and I can't get past this problem:
"Had sent TLV failure, rejecting"
Bellow is the 'radiusd -X' log.
Thanks
------------------------------
Listening on authentication *:1812
Listening on accounting *:1813
Listening on proxy *:1814
Ready to process requests.
rad_recv: Access-Request packet from host 192.168.1.230:21645, id=135,
length=119
User-Name = "xpto1"
Framed-MTU = 1400
Called-Station-Id = "000e.d7b1.3e30"
Calling-Station-Id = "0004.e2aa.b4f2"
Message-Authenticator = 0x29004505131667d146c1a251638d9a3f
EAP-Message = 0x0202000a017870746f31
NAS-Port-Type = Wireless-802.11
NAS-Port = 421
Service-Type = Framed-User
NAS-IP-Address = 192.168.1.230
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
radius_xlat: '/servicos/freeRadius/var/log/radius/radacct/auth-detail'
rlm_detail: /servicos/freeRadius/var/log/radius/radacct/auth-detail expands to
/servicos/freeRadius/var/log/radius/radacct/auth-detail
modcall[authorize]: module "auth_log" returns ok for request 0
rlm_realm: No '@' in User-Name = "xpto1", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 0
rlm_eap: EAP packet type response id 2 length 10
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 0
users: Matched xpto1 at 33
modcall[authorize]: module "files" returns ok for request 0
modcall: group authorize returns updated for request 0
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 0
rlm_eap: EAP Identity
rlm_eap: processing type tls
rlm_eap_tls: Initiate
rlm_eap_tls: Start returned 1
modcall[authenticate]: module "eap" returns handled for request 0
modcall: group authenticate returns handled for request 0
Sending Access-Challenge of id 135 to 192.168.1.230:21645
EAP-Message = 0x010300061520
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x31b3fb4539b4e75af135e9c834f1d2e3
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 192.168.1.230:21645, id=136,
length=133
User-Name = "xpto1"
Framed-MTU = 1400
Called-Station-Id = "000e.d7b1.3e30"
Calling-Station-Id = "0004.e2aa.b4f2"
Message-Authenticator = 0xc090207a0acd1167649a91c74940b03e
EAP-Message = 0x020300060319
NAS-Port-Type = Wireless-802.11
NAS-Port = 421
State = 0x31b3fb4539b4e75af135e9c834f1d2e3
Service-Type = Framed-User
NAS-IP-Address = 192.168.1.230
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 1
radius_xlat: '/servicos/freeRadius/var/log/radius/radacct/auth-detail'
rlm_detail: /servicos/freeRadius/var/log/radius/radacct/auth-detail expands to
/servicos/freeRadius/var/log/radius/radacct/auth-detail
modcall[authorize]: module "auth_log" returns ok for request 1
rlm_realm: No '@' in User-Name = "xpto1", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 1
rlm_eap: EAP packet type response id 3 length 6
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 1
users: Matched xpto1 at 33
modcall[authorize]: module "files" returns ok for request 1
modcall: group authorize returns updated for request 1
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 1
rlm_eap: Request found, released from the list
rlm_eap: EAP NAK
rlm_eap: EAP-NAK asked for EAP-Type/peap
rlm_eap: processing type tls
rlm_eap_tls: Initiate
rlm_eap_tls: Start returned 1
modcall[authenticate]: module "eap" returns handled for request 1
modcall: group authenticate returns handled for request 1
Sending Access-Challenge of id 136 to 192.168.1.230:21645
EAP-Message = 0x010400061920
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xea7a2e0bfa5346eae55a7a8ac07b84f8
Finished request 1
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 192.168.1.230:21645, id=137,
length=207
User-Name = "xpto1"
Framed-MTU = 1400
Called-Station-Id = "000e.d7b1.3e30"
Calling-Station-Id = "0004.e2aa.b4f2"
Message-Authenticator = 0x3e6dac25a6223dc72073df49d0694e7a
EAP-Message =
0x0204005019800000004616030100410100003d0301408ea0010e236d13140e781e74f5123f91fa4c9acae63796c881abf9843188ae00001600040005000a000900640062000300060013001200630100
NAS-Port-Type = Wireless-802.11
NAS-Port = 421
State = 0xea7a2e0bfa5346eae55a7a8ac07b84f8
Service-Type = Framed-User
NAS-IP-Address = 192.168.1.230
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 2
radius_xlat: '/servicos/freeRadius/var/log/radius/radacct/auth-detail'
rlm_detail: /servicos/freeRadius/var/log/radius/radacct/auth-detail expands to
/servicos/freeRadius/var/log/radius/radacct/auth-detail
modcall[authorize]: module "auth_log" returns ok for request 2
rlm_realm: No '@' in User-Name = "xpto1", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 2
rlm_eap: EAP packet type response id 4 length 80
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 2
users: Matched xpto1 at 33
modcall[authorize]: module "files" returns ok for request 2
modcall: group authorize returns updated for request 2
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 2
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
rlm_eap_tls: Length Included
eaptls_verify returned 11
(other): before/accept initialization
TLS_accept: before/accept initialization
rlm_eap_tls: <<< TLS 1.0 Handshake [length 0041], ClientHello
TLS_accept: SSLv3 read client hello A
rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello
TLS_accept: SSLv3 write server hello A
rlm_eap_tls: >>> TLS 1.0 Handshake [length 0694], Certificate
TLS_accept: SSLv3 write certificate A
rlm_eap_tls: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
TLS_accept: SSLv3 write server done A
TLS_accept: SSLv3 flush data
TLS_accept:error in SSLv3 read client certificate A
In SSL Handshake Phase
In SSL Accept mode
eaptls_process returned 13
rlm_eap_peap: EAPTLS_HANDLED
modcall[authenticate]: module "eap" returns handled for request 2
modcall: group authenticate returns handled for request 2
Sending Access-Challenge of id 137 to 192.168.1.230:21645
EAP-Message =
0x0105040a19c0000006f1160301004a020000460301408ea188de12523575817e8390bdb858b8191ad2aec45942e3a9b71c143af21720664babc0a58d923a161a325b1cf741140f54b71a3d73573467e4845b17ab8cdb00040016030106940b00069000068d0002cd308202c930820232a003020102020102300d06092a864886f70d010104050030819f310b30090603550406130243413111300f0603550408130850726f76696e63653112301006035504071309536f6d65204369747931153013060355040a130c4f7267616e697a6174696f6e31123010060355040b13096c6f63616c686f7374311b301906035504031312436c69656e74206365
EAP-Message =
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
EAP-Message =
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
EAP-Message =
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
EAP-Message = 0x652e636f6d301e170d3034303132353133323630375a
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x0a1caa803c5035f808a3a04e94ad179e
Finished request 2
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 192.168.1.230:21645, id=138,
length=133
User-Name = "xpto1"
Framed-MTU = 1400
Called-Station-Id = "000e.d7b1.3e30"
Calling-Station-Id = "0004.e2aa.b4f2"
Message-Authenticator = 0x3f8ccdd565d57b7a02cac8f8def24d2e
EAP-Message = 0x020500061900
NAS-Port-Type = Wireless-802.11
NAS-Port = 421
State = 0x0a1caa803c5035f808a3a04e94ad179e
Service-Type = Framed-User
NAS-IP-Address = 192.168.1.230
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 3
radius_xlat: '/servicos/freeRadius/var/log/radius/radacct/auth-detail'
rlm_detail: /servicos/freeRadius/var/log/radius/radacct/auth-detail expands to
/servicos/freeRadius/var/log/radius/radacct/auth-detail
modcall[authorize]: module "auth_log" returns ok for request 3
rlm_realm: No '@' in User-Name = "xpto1", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 3
rlm_eap: EAP packet type response id 5 length 6
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 3
users: Matched xpto1 at 33
modcall[authorize]: module "files" returns ok for request 3
modcall: group authorize returns updated for request 3
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 3
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
rlm_eap_tls: Received EAP-TLS ACK message
rlm_eap_tls: ack handshake fragment handler
eaptls_verify returned 1
eaptls_process returned 13
rlm_eap_peap: EAPTLS_HANDLED
modcall[authenticate]: module "eap" returns handled for request 3
modcall: group authenticate returns handled for request 3
Sending Access-Challenge of id 138 to 192.168.1.230:21645
EAP-Message =
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
EAP-Message =
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
EAP-Message =
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
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xfd2c42b16f7489b27dcc559881aae1f2
Finished request 3
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 192.168.1.230:21645, id=139,
length=319
User-Name = "xpto1"
Framed-MTU = 1400
Called-Station-Id = "000e.d7b1.3e30"
Calling-Station-Id = "0004.e2aa.b4f2"
Message-Authenticator = 0x2d8e802fe1714737cec61db525370ecf
EAP-Message =
0x020600c01980000000b616030100861000008200805dc72c9dc8d8f4ea65ce7ee6f10d0b80fbf0b5aeb97ab9f7ab2ad301f527650b6cc3089b688651a6420df51d2594642f94f8d092000edbce4ba099ca7153ae9be65fe55de96af2bf46da52843b7feec444e7683c76bbfed2cd8ef873cf90431be94e54cce6de08ab00bd51a80575adae4b623e9cee8db072c0f2ce55d5638f6514030100010116030100206d7f504b7c14009df312646d7e2c4cd6acf44ee02f6d7d79fbbd0ae90bb5828c
NAS-Port-Type = Wireless-802.11
NAS-Port = 421
State = 0xfd2c42b16f7489b27dcc559881aae1f2
Service-Type = Framed-User
NAS-IP-Address = 192.168.1.230
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 4
radius_xlat: '/servicos/freeRadius/var/log/radius/radacct/auth-detail'
rlm_detail: /servicos/freeRadius/var/log/radius/radacct/auth-detail expands to
/servicos/freeRadius/var/log/radius/radacct/auth-detail
modcall[authorize]: module "auth_log" returns ok for request 4
rlm_realm: No '@' in User-Name = "xpto1", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 4
rlm_eap: EAP packet type response id 6 length 192
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 4
users: Matched xpto1 at 33
modcall[authorize]: module "files" returns ok for request 4
modcall: group authorize returns updated for request 4
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 4
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
rlm_eap_tls: Length Included
eaptls_verify returned 11
rlm_eap_tls: <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange
TLS_accept: SSLv3 read client key exchange A
rlm_eap_tls: <<< TLS 1.0 ChangeCipherSpec [length 0001]
rlm_eap_tls: <<< TLS 1.0 Handshake [length 0010], Finished
TLS_accept: SSLv3 read finished A
rlm_eap_tls: >>> TLS 1.0 ChangeCipherSpec [length 0001]
TLS_accept: SSLv3 write change cipher spec A
rlm_eap_tls: >>> TLS 1.0 Handshake [length 0010], Finished
TLS_accept: SSLv3 write finished A
TLS_accept: SSLv3 flush data
(other): SSL negotiation finished successfully
SSL Connection Established
eaptls_process returned 13
rlm_eap_peap: EAPTLS_HANDLED
modcall[authenticate]: module "eap" returns handled for request 4
modcall: group authenticate returns handled for request 4
Sending Access-Challenge of id 139 to 192.168.1.230:21645
EAP-Message =
0x0107003119001403010001011603010020a9b03e10d77e1b65aa574eaee1a54c40b890028131fa1b808e2593e7156bdabe
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xd090259828bffc4623194a1baeb025fd
Finished request 4
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 192.168.1.230:21645, id=140,
length=133
User-Name = "xpto1"
Framed-MTU = 1400
Called-Station-Id = "000e.d7b1.3e30"
Calling-Station-Id = "0004.e2aa.b4f2"
Message-Authenticator = 0x6443dbef487769a00f49b8e75d72f327
EAP-Message = 0x020700061900
NAS-Port-Type = Wireless-802.11
NAS-Port = 421
State = 0xd090259828bffc4623194a1baeb025fd
Service-Type = Framed-User
NAS-IP-Address = 192.168.1.230
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 5
radius_xlat: '/servicos/freeRadius/var/log/radius/radacct/auth-detail'
rlm_detail: /servicos/freeRadius/var/log/radius/radacct/auth-detail expands to
/servicos/freeRadius/var/log/radius/radacct/auth-detail
modcall[authorize]: module "auth_log" returns ok for request 5
rlm_realm: No '@' in User-Name = "xpto1", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 5
rlm_eap: EAP packet type response id 7 length 6
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 5
users: Matched xpto1 at 33
modcall[authorize]: module "files" returns ok for request 5
modcall: group authorize returns updated for request 5
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 5
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
rlm_eap_tls: Received EAP-TLS ACK message
rlm_eap_tls: ack handshake is finished
eaptls_verify returned 3
eaptls_process returned 3
rlm_eap_peap: EAPTLS_SUCCESS
modcall[authenticate]: module "eap" returns handled for request 5
modcall: group authenticate returns handled for request 5
Sending Access-Challenge of id 140 to 192.168.1.230:21645
EAP-Message =
0x0108002019001703010015f317a0be4ba01f7c2850962ec2d6b9e9139ff85606
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xec0755fde68cf91725bee5a5f9369b53
Finished request 5
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 192.168.1.230:21645, id=141,
length=160
User-Name = "xpto1"
Framed-MTU = 1400
Called-Station-Id = "000e.d7b1.3e30"
Calling-Station-Id = "0004.e2aa.b4f2"
Message-Authenticator = 0x49432bb90a3d6fa3cc233b7f4eca339c
EAP-Message =
0x020800211900170301001661c9300edf7e604a8150baea3cbf189a2f2d2855c8c2
NAS-Port-Type = Wireless-802.11
NAS-Port = 421
State = 0xec0755fde68cf91725bee5a5f9369b53
Service-Type = Framed-User
NAS-IP-Address = 192.168.1.230
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 6
radius_xlat: '/servicos/freeRadius/var/log/radius/radacct/auth-detail'
rlm_detail: /servicos/freeRadius/var/log/radius/radacct/auth-detail expands to
/servicos/freeRadius/var/log/radius/radacct/auth-detail
modcall[authorize]: module "auth_log" returns ok for request 6
rlm_realm: No '@' in User-Name = "xpto1", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 6
rlm_eap: EAP packet type response id 8 length 33
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 6
users: Matched xpto1 at 33
modcall[authorize]: module "files" returns ok for request 6
modcall: group authorize returns updated for request 6
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 6
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
eaptls_verify returned 7
rlm_eap_tls: Done initial handshake
eaptls_process returned 7
rlm_eap_peap: EAPTLS_OK
rlm_eap_peap: Session established. Decoding tunneled attributes.
rlm_eap_peap: Identity - xpto1
rlm_eap_peap: Tunneled data is valid.
PEAP: Got tunneled EAP-Message
EAP-Message = 0x0208000a017870746f31
PEAP: Got tunneled identity of xpto1
PEAP: Setting default EAP type for tunneled EAP session.
PEAP: Setting User-Name to xpto1
PEAP: Sending tunneled request
EAP-Message = 0x0208000a017870746f31
FreeRADIUS-Proxied-To = 127.0.0.1
User-Name = "xpto1"
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 6
radius_xlat: '/servicos/freeRadius/var/log/radius/radacct/auth-detail'
rlm_detail: /servicos/freeRadius/var/log/radius/radacct/auth-detail expands to
/servicos/freeRadius/var/log/radius/radacct/auth-detail
modcall[authorize]: module "auth_log" returns ok for request 6
rlm_realm: No '@' in User-Name = "xpto1", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 6
rlm_eap: EAP packet type response id 8 length 10
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 6
users: Matched xpto1 at 33
modcall[authorize]: module "files" returns ok for request 6
modcall: group authorize returns updated for request 6
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 6
rlm_eap: EAP Identity
rlm_eap: processing type mschapv2
rlm_eap_mschapv2: Issuing Challenge
modcall[authenticate]: module "eap" returns handled for request 6
modcall: group authenticate returns handled for request 6
PEAP: Got tunneled reply RADIUS code 11
EAP-Message = 0x0109001f1a0109001a105529ed01151cb7a297b9d4eec5085b327870746f31
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x357db4a0baf7c780cb0874f0b4f807d6
PEAP: Processing from tunneled session code 0x8182f60 11
EAP-Message = 0x0109001f1a0109001a105529ed01151cb7a297b9d4eec5085b327870746f31
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x357db4a0baf7c780cb0874f0b4f807d6
PEAP: Got tunneled Access-Challenge
modcall[authenticate]: module "eap" returns handled for request 6
modcall: group authenticate returns handled for request 6
Sending Access-Challenge of id 141 to 192.168.1.230:21645
EAP-Message =
0x010900361900170301002b9fb14d8ea6eeab00267da0962dff083522c3a947c0f1f7696e8f974aa7eefa49b797c2be070ca36509dbd5
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x3a106f56af29c99fe6957e304e943066
Finished request 6
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 192.168.1.230:21645, id=142,
length=214
User-Name = "xpto1"
Framed-MTU = 1400
Called-Station-Id = "000e.d7b1.3e30"
Calling-Station-Id = "0004.e2aa.b4f2"
Message-Authenticator = 0x380695227a4a294521d9c655da7ab889
EAP-Message =
0x020900571900170301004c9fa0c87e5ebdf24511bd51d08e97ac2963d4db343a75ff6cdfd65ffc93f0611f0494569f623e48f7ac1ad5e4a7bdb64cd82ea3d643c1441a746a4bb310f0f7d87b32a90fc5de31e57b678adb
NAS-Port-Type = Wireless-802.11
NAS-Port = 421
State = 0x3a106f56af29c99fe6957e304e943066
Service-Type = Framed-User
NAS-IP-Address = 192.168.1.230
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 7
radius_xlat: '/servicos/freeRadius/var/log/radius/radacct/auth-detail'
rlm_detail: /servicos/freeRadius/var/log/radius/radacct/auth-detail expands to
/servicos/freeRadius/var/log/radius/radacct/auth-detail
modcall[authorize]: module "auth_log" returns ok for request 7
rlm_realm: No '@' in User-Name = "xpto1", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 7
rlm_eap: EAP packet type response id 9 length 87
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 7
users: Matched xpto1 at 33
modcall[authorize]: module "files" returns ok for request 7
modcall: group authorize returns updated for request 7
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 7
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
eaptls_verify returned 7
rlm_eap_tls: Done initial handshake
eaptls_process returned 7
rlm_eap_peap: EAPTLS_OK
rlm_eap_peap: Session established. Decoding tunneled attributes.
rlm_eap_peap: EAP type mschapv2
rlm_eap_peap: Tunneled data is valid.
PEAP: Got tunneled EAP-Message
EAP-Message =
0x020900401a0209003b31ea807b652444b45684b1792b35e990230000000000000000118751a3edb39bd054649e8ce03a486444b3511ff9d78200007870746f31
PEAP: Setting User-Name to xpto1
PEAP: Adding old state with 35 7d
PEAP: Sending tunneled request
EAP-Message =
0x020900401a0209003b31ea807b652444b45684b1792b35e990230000000000000000118751a3edb39bd054649e8ce03a486444b3511ff9d78200007870746f31
FreeRADIUS-Proxied-To = 127.0.0.1
User-Name = "xpto1"
State = 0x357db4a0baf7c780cb0874f0b4f807d6
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 7
radius_xlat: '/servicos/freeRadius/var/log/radius/radacct/auth-detail'
rlm_detail: /servicos/freeRadius/var/log/radius/radacct/auth-detail expands to
/servicos/freeRadius/var/log/radius/radacct/auth-detail
modcall[authorize]: module "auth_log" returns ok for request 7
rlm_realm: No '@' in User-Name = "xpto1", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 7
rlm_eap: EAP packet type response id 9 length 64
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 7
users: Matched xpto1 at 33
modcall[authorize]: module "files" returns ok for request 7
modcall: group authorize returns updated for request 7
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 7
rlm_eap: Request found, released from the list
rlm_eap: EAP/mschapv2
rlm_eap: processing type mschapv2
rlm_eap_mschapv2: Response is of incorrect length
rlm_eap: Handler failed in EAP/mschapv2
rlm_eap: Failed in EAP select
modcall[authenticate]: module "eap" returns invalid for request 7
modcall: group authenticate returns invalid for request 7
auth: Failed to validate the user.
PEAP: Got tunneled reply RADIUS code 3
EAP-Message = 0x04090004
Message-Authenticator = 0x00000000000000000000000000000000
PEAP: Processing from tunneled session code 0x815f4b0 3
EAP-Message = 0x04090004
Message-Authenticator = 0x00000000000000000000000000000000
PEAP: Tunneled authentication was rejected.
rlm_eap_peap: FAILURE
modcall[authenticate]: module "eap" returns handled for request 7
modcall: group authenticate returns handled for request 7
Sending Access-Challenge of id 142 to 192.168.1.230:21645
EAP-Message =
0x010a00261900170301001ba1ff2bf8c084a2a42acf01a5847bccc3b94e756014379cd25748c8
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xf4b7effc1439ab129f9209f18694d1e5
Finished request 7
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 192.168.1.230:21645, id=143,
length=165
User-Name = "xpto1"
Framed-MTU = 1400
Called-Station-Id = "000e.d7b1.3e30"
Calling-Station-Id = "0004.e2aa.b4f2"
Message-Authenticator = 0x226f30f944b9f0366441b057e8f103a4
EAP-Message =
0x020a00261900170301001bb9554ee96adfd0ff14e4acf1f0d14ef23ed446a244b5c123ee20e8
NAS-Port-Type = Wireless-802.11
NAS-Port = 421
State = 0xf4b7effc1439ab129f9209f18694d1e5
Service-Type = Framed-User
NAS-IP-Address = 192.168.1.230
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 8
radius_xlat: '/servicos/freeRadius/var/log/radius/radacct/auth-detail'
rlm_detail: /servicos/freeRadius/var/log/radius/radacct/auth-detail expands to
/servicos/freeRadius/var/log/radius/radacct/auth-detail
modcall[authorize]: module "auth_log" returns ok for request 8
rlm_realm: No '@' in User-Name = "xpto1", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 8
rlm_eap: EAP packet type response id 10 length 38
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 8
users: Matched xpto1 at 33
modcall[authorize]: module "files" returns ok for request 8
modcall: group authorize returns updated for request 8
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 8
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
eaptls_verify returned 7
rlm_eap_tls: Done initial handshake
eaptls_process returned 7
rlm_eap_peap: EAPTLS_OK
rlm_eap_peap: Session established. Decoding tunneled attributes.
rlm_eap_peap: Received EAP-TLV response.
rlm_eap_peap: Tunneled data is valid.
rlm_eap_peap: Had sent TLV failure, rejecting.
rlm_eap: Handler failed in EAP/peap
rlm_eap: Failed in EAP select
modcall[authenticate]: module "eap" returns invalid for request 8
modcall: group authenticate returns invalid for request 8
auth: Failed to validate the user.
Delaying request 8 for 1 seconds
Finished request 8
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 192.168.1.230:21645, id=143,
length=165
Sending Access-Reject of id 143 to 192.168.1.230:21645
EAP-Message = 0x040a0004
Message-Authenticator = 0x00000000000000000000000000000000
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Cleaning up request 0 ID 135 with timestamp 408ea188
Cleaning up request 1 ID 136 with timestamp 408ea188
Cleaning up request 2 ID 137 with timestamp 408ea188
Cleaning up request 3 ID 138 with timestamp 408ea188
Cleaning up request 4 ID 139 with timestamp 408ea188
Cleaning up request 5 ID 140 with timestamp 408ea188
Cleaning up request 6 ID 141 with timestamp 408ea188
Cleaning up request 7 ID 142 with timestamp 408ea188
Cleaning up request 8 ID 143 with timestamp 408ea188
Nothing to do. Sleeping until we see a request.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
