Nobody faced this problem ? >Hi everybody. >I'm using freeradius with EAP/TLS authentication method and everything is working >fine if I use Windows 2000 and XP clients (with Funk Odyssey client), but using >Windows 98 and the same certificates (created using OpenSSL) and again the Odyssey >client I cannot authenticate and what I got on the freeradius log is what I reported >below. Does anybody already faced this problem or has some suggestion ? >Thank you in advance. > > Mattia > > > >modcall: group authorize returns updated for request 474 > rad_check_password: Found Auth-Type EAP >auth: type "EAP" >modcall: entering group authenticate for request 474 > rlm_eap: EAP packet type notification id 4 length 17 > rlm_eap: EAP Start not found > rlm_eap: Request found, released from the list > rlm_eap: EAP_TYPE - tls > rlm_eap: processing type tls > rlm_eap_tls: Authenticate >rlm_eap_tls: Length Included >rlm_eap_tls: <<< TLS 1.0 Alert [length 0002], fatal handshake_failure >TLS Alert read:fatal:handshake failure >TLS_accept:failed in SSLv3 read client certificate A >rlm_eap_tls: SSL_read Error >1247:error:14094410:SSL routines:SSL3_READ_BYTES:sslv3 alert handshake >failure:s3_pkt.c:1052:SSL alert number 40 >1247:error:140940E5:SSL routines:SSL3_READ_BYTES:ssl handshake failure:s3_pkt.c:837: > Error code is ..... 5 > Error in SSL ..... 5 >rlm_eap_tls: BIO_read Error > Error code is ..... 5 > Error in SSL ..... 5 > rlm_eap: Freeing handler > modcall[authenticate]: module "eap" returns ok for request 474 >modcall: group authenticate returns ok for request 474 >Delaying request 474 for 1 seconds >Finished request 474 >Going to the next request >Waking up in 5 seconds... >
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
