On Wed, 26 May 2004, Joseph Silvin wrote: > Hi, > > I am trying to authenticate Cisco AP 1200 against FreeRadius through > LDAP.The following is the error I am getting after stage 2 "rlm_eap_leap: > No User-Password or NT-Password configured for this user". The LDAP > authentication is getting done. and the EAP is also getting started. But, > the credentials of the LDAP is not getting used for EAP. > > Please suggest the reason for this error. Log is given below. > > Joseph > > =============================================================================== > rad_recv: Access-Request packet from host 192.168.1.7:21645, id=245, > length=125 > User-Name = "FAnthony" > Framed-MTU = 1400 > Called-Station-Id = "000e.d7b1.008b" > Calling-Station-Id = "000f.2478.85cf" > Message-Authenticator = 0x2f568765c076a1cc35ec515b50580740 > EAP-Message = 0x0202000d0146416e74686f6e79 > NAS-Port-Type = Wireless-802.11 > NAS-Port = 485 > Service-Type = Framed-User > NAS-IP-Address = 192.168.1.7
[...] > rlm_ldap: Password header not found in password (91CA0741343JHUG6C9A32A21F) > for user FAnthony The above is the error you are looking for. Check the password_header ldap configuration directive. > rlm_ldap: looking for check items in directory... > rlm_ldap: looking for reply items in directory... -- Kostas Kalevras Network Operations Center [EMAIL PROTECTED] National Technical University of Athens, Greece Work Phone: +30 210 7721861 'Go back to the shadow' Gandalf - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
