Hi I have added port-limit=2, but the user is still getting error 52, duplicate name exists on network. I tried this in both group-check & group-reply.
Rgds Lee -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Kostas Kalevras Sent: 27 May 2004 12:38 To: [EMAIL PROTECTED] Subject: Re: Multilink PPP On Thu, 27 May 2004, Lee Norvall wrote: > Hi > > I am currently looking into using MLPPP. I have added > "Simultaneous-Use := 2" but I cannot get this to work with the Cisco > nas (setup in naspasswd and naslist and SNMP is working). Is there a > diferent/better way to do this, just to allow multi-users? You don't need to set simultaneous-use=2, rather port-limit=2 > > Rgds > > > > --- > Outgoing mail is certified Virus Free. > Checked by AVG anti-virus system (http://www.grisoft.com). > Version: 6.0.691 / Virus Database: 452 - Release Date: 26/05/2004 > > -- Kostas Kalevras Network Operations Center [EMAIL PROTECTED] National Technical University of Athens, Greece Work Phone: +30 210 7721861 'Go back to the shadow' Gandalf - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html --- Incoming mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.691 / Virus Database: 452 - Release Date: 26/05/2004 --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.691 / Virus Database: 452 - Release Date: 26/05/2004 - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
