Hi group
Im new to linux and RADIUS and have a few questions regarding configuring my
radius server
I have installed Cistron Radius 1.6.6 on my redhat 9.0 machine. My goal is
to authenticate all users on a wireless 802.1x network, and here are the
specs.
Router: 10.10.0.1
Gateway(Clark Connect)/ Cistron radius server:
External Eth0 10.10.0.101 DHCP
Lan Eth1 192.168.1.1 Static
Accecpoint ( Zyxel Zyair - Not transparent)
Wan: 192.168.1.2
Lan: 192.168.2.1
Users on the LAN side of the accespoint is given a static IP adress, and my
soul aim is to authenticate these users when they log on to the internet.
I have installed the radius server, almost succesfull, but no prompt appears
when logging on to the internet ?? The clients simply log on to the
internet, without being promted for a user/pass.
Here are som tests, configs from the radius server:
Raddb/users file :
Sumsar Password="Beatles", Simultaneous-Use =1, Expiration_"Jan 01
2020"
Service-Type = Framed-User,
Framed-Protocol = PPP,
Framed-IP-Address = 255.255.255.254,
Framed-Routing = None
DEFAULT Auth-Type = System
Fall-Through = 1
Radtest
radtest sumsar Beatles localhost 0 testing123
radrecv: Packet from host 127.0.0.1 code=2, id=106, length=44
What is wrong, I urgently need help resolving this, PLZ comment if u need
further information regarding the configs on the radius server, but plz keep
in mind that im new to linux and radius.
Will I need to install anything on the clients to make radius authentication
work ?
A guide to where i need to
reconfigure is high on my wishlist !
Hope u can help me
Jacob Clausen
Denmark
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
