Hi,
1. This is not a cisco userlist.
2. Try this
config t
aaa group server radius rad1
server qqqq auth-port 1812 acct-port 1813
!
aaa authorization exec h323 group rad1
Regards,
K
--- �smail CAN <[EMAIL PROTECTED]> wrote: >
Hello,
>
> I have a problem with my as5350 gateway. I work
> gateway-to-gateway. I dont`use gatekeeper. I try to
> terminate calls. My scenario is:
>
>
> GW1------>myGW---controller e1------------>GSM
> Channel Bank
> |
> |
> freeradius
>
> If a call comes from GW1 to myGW, first I want to
> authenticate and authorize call based on the ip
> address of GW1 via freeradius. Then account. I can
> only send accounting request to radius. I can not
> send authenticating and authorizing request to
> radius. Can you help me?
> My config is:
> Current configuration : 10036 bytes
> !
> ! Last configuration change at 13:17:29 GMT Sat Jan
> 1 2000 by shrntrsn
> !
> version 12.2
> service tcp-keepalives-in
> service tcp-keepalives-out
> service timestamps debug datetime msec
> service timestamps log datetime msec
> service password-encryption
> !
> hostname Router
> !
> no boot startup-test
> aaa new-model
> !
> !
> aaa authentication login default group radius
> aaa authentication login h323 group radius
> aaa authentication ppp default group radius
> aaa authentication ppp h323 group radius
> aaa authorization exec h323 group radius
> if-authenticated
> aaa authorization network default group radius
> if-authenticated
> aaa accounting update newinfo
> aaa accounting network h323 start-stop group radius
> aaa accounting connection h323 start-stop group
> radius
> aaa accounting resource h323 start-stop group radius
> aaa session-id common
> !
> !
> resource-pool disable
> clock timezone GMT 0
> clock calendar-valid
> spe country turkey
> !
> !
> !
> !
> !
> ip subnet-zero
> ip cef
> !
> class-map match-all deneme
> match none
> !
> !
> policy-map deneme
> !
> voice call send-alert
> voice rtp send-recv
> !
> voice service pots
> !
> voice class codec 312
> codec preference 1 g729r8
> !
> voice class codec 99
> codec preference 1 g729r8
> codec preference 2 g723r63
> !
> voice class codec 80
> codec preference 1 g729r8
> !
> !
> !
> voice class h323 1
> call start fast
> !
> voice class h323 99
> call start fast
> !
> voice class h323 80
> h225 timeout tcp establish 10
> call start fast
> !
> !
> !
> !
> !
> fax interface-type fax-mail
> mta receive maximum-recipients 0
> !
> controller E1 3/0
> shutdown
> !
> controller E1 3/1
> shutdown
> !
> controller E1 3/2
> ds0-group 1 timeslots 1-15 type r2-digital
> ds0-group 2 timeslots 17-31 type r2-digital
> ds0 busyout 28-31 hard
> !
> controller E1 3/3
> shutdown
> !
> gw-accounting h323
> gw-accounting h323 vsa
> gw-accounting voip
> !
> !
> interface FastEthernet0/0
> ip address x.x.x.x y.y.y.y
> ip access-group h323 in
> duplex auto
> speed auto
> no cdp enable
> h323-gateway voip bind srcaddr x.x.x.x
> !
> interface FastEthernet0/1
> no ip address
> shutdown
> duplex auto
> speed auto
> !
> interface Serial0/0
> shutdown
> no ip address
> no ip mroute-cache
> clockrate 2000000
> !
> interface Serial0/1
> no ip address
> shutdown
> clockrate 2000000
> !
> interface Async1/00
> no ip address
> !
> interface Async1/01
> no ip address
> !
> interface Async1/02
> no ip address
> ip classless
> ip route 0.0.0.0 0.0.0.0 y.y.y.y
> no ip http server
> snmp-server community aaaaa RO
> snmp-server enable traps snmp authentication
> linkdown linkup coldstart warmstart
> snmp-server enable traps calltracker
> snmp-server enable traps tty
> snmp-server enable traps modem-health
> snmp-server enable traps ds0-busyout
> snmp-server enable traps ds1-loopback
> snmp-server enable traps isdn call-information
> snmp-server enable traps isdn layer2
> snmp-server enable traps isdn chan-not-avail
> snmp-server enable traps fru-ctrl
> snmp-server enable traps hsrp
> snmp-server enable traps config
> snmp-server enable traps entity
> snmp-server enable traps envmon
> snmp-server enable traps aaa_server
> snmp-server enable traps bgp
> snmp-server enable traps pim neighbor-change
> rp-mapping-change invalid-pim-messa
> ge
> snmp-server enable traps ipmulticast
> snmp-server enable traps msdp
> snmp-server enable traps rsvp
> snmp-server enable traps frame-relay
> snmp-server enable traps rtr
> snmp-server enable traps syslog
> snmp-server enable traps dlsw
> snmp-server enable traps dial
> snmp-server enable traps dsp card-status
> snmp-server enable traps voice poor-qov
> snmp-server enable traps dnis
> snmp-server enable traps xgcp
> snmp ifmib ifalias long
> !
> !
> radius-server host qqqq auth-port 1812 acct-port
> 1813
> radius-server retransmit 3
> radius-server attribute 8 include-in-access-req
> radius-server key 222222222
> radius-server vsa send accounting
> radius-server vsa send authentication
> call rsvp-sync
> !
> voice-port 3/2:1
> input gain 6
> echo-cancel coverage 16
> compand-type a-law
> cptone TR
> timeouts interdigit 2
> timeouts ringing infinity
> bearer-cap Speech
> !
> voice-port 3/2:2
> input gain 6
> echo-cancel coverage 16
> compand-type a-law
> cptone TR
> timeouts interdigit 2
> timeouts ringing infinity
> bearer-cap Speech
> !
> voice-class aaa 1
> authentication method h323
> authorization method h323
> accounting method h323
> mgcp profile default
> !
> dial-peer cor custom
> !
> !
> !
> dial-peer voice 99 voip
> incoming called-number ssss
> voice-class codec 99
> voice-class h323 99
> dtmf-relay h245-signal h245-alphanumeric
> !
> dial-peer voice 1 pots
> max-conn 20
> destination-pattern T
> port 3/2:1
> forward-digits 11
> prefix ,
> voice class aaa 1
> !
> dial-peer voice 2 pots
> max-conn 20
> destination-pattern
> forward-digit 11
> port 3/2:2
> prefix ,
>
>
> ---------------------------------
> Do you Yahoo!?
> New and Improved Yahoo! Mail - 100MB free storage!
___________________________________________________________ALL-NEW Yahoo! Messenger -
sooooo many all-new ways to express yourself http://uk.messenger.yahoo.com
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
