I found out what my problem was:
the AP-8110 does not support PEAP.
I thought that this was odd, because it does support some EAP-types.
I am in contact with the manufacturer to see if there is an upgrade
available.
-Mark
On Wed, 2004-07-07 at 15:18, Michael Griego wrote:
> Be sure you have added the CA certificate into the trusted root store on
> your windows machine. If you haven't, your PEAP conversation will stop
> at this point (right after receiving the EAP-Identity response).
>
> --Mike
>
>
> On Wed, 2004-07-07 at 12:01, Mark Hoffer wrote:
> > Hello Rinaldo-
> >
> > I tried what you told me, and it did not help.
> >
> > I'm looking at the log here, and see that it is building the TLS
> > connection, but it is not going to the next step, whatever that may be.
> >
> > The XP machine just sits at "Attempting to authenticate"
> >
> > If I do a packet dump, then I am able to see the traffic go back and
> > forth, with no NAKs. I even tried setting a static IP for the machine.
> >
> > Is there something that I am missing?
> >
> > -Mark
> >
> > /root/start-rad -sAX
> > + LD_LIBRARY_PATH=/usr/lib
> > + LD_PRELOAD=/usr/lib/libcrypto.so
> > + export LD_LIBRARY_PATH LD_PRELOAD
> > + radiusd -sAX
> > Starting - reading configuration files ...
> > reread_config: reading radiusd.conf
> > Config: including file: /usr/local/etc/raddb/proxy.conf
> > Config: including file: /usr/local/etc/raddb/clients.conf
> > Config: including file: /usr/local/etc/raddb/snmp.conf
> > Config: including file: /usr/local/etc/raddb/eap.conf
> > Config: including file: /usr/local/etc/raddb/sql.conf
> > main: prefix = "/usr/local"
> > main: localstatedir = "/usr/local/var"
> > main: logdir = "/usr/local/var/log/radius"
> > main: libdir = "/usr/local/lib"
> > main: radacctdir = "/usr/local/var/log/radius/radacct"
> > main: hostname_lookups = no
> > main: max_request_time = 30
> > main: cleanup_delay = 5
> > main: max_requests = 1024
> > main: delete_blocked_requests = 0
> > main: port = 0
> > main: allow_core_dumps = no
> > main: log_stripped_names = no
> > main: log_file = "/usr/local/var/log/radius/radius.log"
> > main: log_destination = "files"
> > main: log_auth = no
> > main: log_auth_badpass = no
> > main: log_auth_goodpass = no
> > main: pidfile = "/usr/local/var/run/radiusd/radiusd.pid"
> > main: user = "(null)"
> > main: group = "(null)"
> > main: usercollide = no
> > main: lower_user = "no"
> > main: lower_pass = "no"
> > main: nospace_user = "no"
> > main: nospace_pass = "no"
> > main: checkrad = "/usr/local/sbin/checkrad"
> > main: debug_level = 0
> > main: proxy_requests = yes
> > proxy: retry_delay = 5
> > proxy: retry_count = 3
> > proxy: synchronous = no
> > proxy: default_fallback = yes
> > proxy: dead_time = 120
> > proxy: post_proxy_authorize = yes
> > proxy: wake_all_if_all_dead = no
> > security: max_attributes = 200
> > security: reject_delay = 1
> > security: status_server = no
> > read_config_files: reading dictionary
> > read_config_files: reading naslist
> > Using deprecated naslist file. Support for this will go away soon.
> > read_config_files: reading clients
> > read_config_files: reading realms
> > radiusd: entering modules setup
> > Module: Library search path is /usr/local/lib
> > Module: Loaded exec
> > exec: wait = yes
> > exec: program = "(null)"
> > exec: input_pairs = "request"
> > exec: output_pairs = "(null)"
> > exec: packet_type = "(null)"
> > rlm_exec: Wait=yes but no output defined. Did you mean output=none?
> > Module: Instantiated exec (exec)
> > Module: Loaded expr
> > Module: Instantiated expr (expr)
> > Module: Loaded PAP
> > pap: encryption_scheme = "crypt"
> > Module: Instantiated pap (pap)
> > Module: Loaded CHAP
> > Module: Instantiated chap (chap)
> > Module: Loaded MS-CHAP
> > mschap: use_mppe = no
> > mschap: require_encryption = no
> > mschap: require_strong = no
> > mschap: with_ntdomain_hack = no
> > mschap: passwd = "(null)"
> > mschap: authtype = "MS-CHAP"
> > mschap: ntlm_auth = "(null)"
> > Module: Instantiated mschap (mschap)
> > Module: Loaded eap
> > eap: default_eap_type = "peap"
> > eap: timer_expire = 60
> > eap: ignore_unknown_eap_types = yes
> > eap: cisco_accounting_username_bug = no
> > rlm_eap: Loaded and initialized type md5
> > rlm_eap: Loaded and initialized type leap
> > gtc: challenge = "Password: "
> > gtc: auth_type = "Local"
> > rlm_eap: Loaded and initialized type gtc
> > tls: rsa_key_exchange = no
> > tls: dh_key_exchange = yes
> > tls: rsa_key_length = 512
> > tls: dh_key_length = 512
> > tls: verify_depth = 0
> > tls: CA_path = "(null)"
> > tls: pem_file_type = yes
> > tls: private_key_file = "/usr/local/etc/raddb/certs/cert-srv.pem"
> > tls: certificate_file = "/usr/local/etc/raddb/certs/cert-srv.pem"
> > tls: CA_file = "/usr/local/etc/raddb/certs/root.pem"
> > tls: private_key_password = "kickass"
> > tls: dh_file = "/usr/local/etc/raddb/certs/dh"
> > tls: random_file = "/usr/local/etc/raddb/certs/random"
> > tls: fragment_size = 1024
> > tls: include_length = yes
> > tls: check_crl = no
> > tls: check_cert_cn = "(null)"
> > rlm_eap: Loaded and initialized type tls
> > peap: default_eap_type = "mschapv2"
> > peap: copy_request_to_tunnel = no
> > peap: use_tunneled_reply = no
> > peap: proxy_tunneled_request_as_eap = yes
> > rlm_eap: Loaded and initialized type peap
> > mschapv2: with_ntdomain_hack = no
> > rlm_eap: Loaded and initialized type mschapv2
> > Module: Instantiated eap (eap)
> > Module: Loaded preprocess
> > preprocess: huntgroups = "/usr/local/etc/raddb/huntgroups"
> > preprocess: hints = "/usr/local/etc/raddb/hints"
> > preprocess: with_ascend_hack = no
> > preprocess: ascend_channels_per_line = 23
> > preprocess: with_ntdomain_hack = no
> > preprocess: with_specialix_jetstream_hack = no
> > preprocess: with_cisco_vsa_hack = no
> > Module: Instantiated preprocess (preprocess)
> > Module: Loaded files
> > files: usersfile = "/usr/local/etc/raddb/users"
> > files: acctusersfile = "/usr/local/etc/raddb/acct_users"
> > files: preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users"
> > files: compat = "no"
> > Module: Instantiated files (files)
> > Module: Loaded Acct-Unique-Session-Id
> > acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address,
> > Client-IP-Address, NAS-Port"
> > Module: Instantiated acct_unique (acct_unique)
> > Module: Loaded realm
> > realm: format = "suffix"
> > realm: delimiter = "@"
> > realm: ignore_default = no
> > realm: ignore_null = no
> > Module: Instantiated realm (suffix)
> > Module: Loaded detail
> > detail: detailfile =
> > "/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
> > detail: detailperm = 384
> > detail: dirperm = 493
> > detail: locking = no
> > Module: Instantiated detail (detail)
> > Module: Loaded System
> > unix: cache = no
> > unix: passwd = "(null)"
> > unix: shadow = "(null)"
> > unix: group = "(null)"
> > unix: radwtmp = "/usr/local/var/log/radius/radwtmp"
> > unix: usegroup = no
> > unix: cache_reload = 600
> > Module: Instantiated unix (unix)
> > Module: Loaded radutmp
> > radutmp: filename = "/usr/local/var/log/radius/radutmp"
> > radutmp: username = "%{User-Name}"
> > radutmp: case_sensitive = yes
> > radutmp: check_with_nas = yes
> > radutmp: perm = 384
> > radutmp: callerid = yes
> > Module: Instantiated radutmp (radutmp)
> > Listening on authentication *:1812
> > Listening on accounting *:1813
> > Listening on proxy *:1814
> > Ready to process requests.
> >
> >
> >
> > rad_recv: Access-Request packet from host 24.140.1.84:32805, id=1,
> > length=121
> > User-Name = "hoffer"
> > NAS-IP-Address = 24.140.1.84
> > Called-Station-Id = "00026f3033c7"
> > Calling-Station-Id = "009096ae41d0"
> > NAS-Identifier = "ap"
> > NAS-Port = 29
> > Service-Type = Framed-User
> > Framed-MTU = 1400
> > NAS-Port-Type = Wireless-802.11
> > EAP-Message = 0x0200000b01686f66666572
> > Message-Authenticator = 0x3f2fdd17530dc1a76450f99c18cea7ed
> > Processing the authorize section of radiusd.conf
> > modcall: entering group authorize for request 0
> > modcall[authorize]: module "preprocess" returns ok for request 0
> > modcall[authorize]: module "chap" returns noop for request 0
> > modcall[authorize]: module "mschap" returns noop for request 0
> > users: Matched hoffer at 1
> > modcall[authorize]: module "files" returns ok for request 0
> > rlm_eap: EAP packet type response id 0 length 11
> > rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
> > modcall[authorize]: module "eap" returns updated for request 0
> > modcall: group authorize returns updated for request 0
> > rad_check_password: Found Auth-Type EAP
> > auth: type "EAP"
> > Processing the authenticate section of radiusd.conf
> > modcall: entering group authenticate for request 0
> > rlm_eap: EAP Identity
> > rlm_eap: processing type tls
> > rlm_eap_tls: Initiate
> > rlm_eap_tls: Start returned 1
> > modcall[authenticate]: module "eap" returns handled for request 0
> > modcall: group authenticate returns handled for request 0
> > Sending Access-Challenge of id 1 to 24.140.1.84:32805
> > EAP-Message = 0x010100061920
> > Message-Authenticator = 0x00000000000000000000000000000000
> > State = 0x175b2c823bd214971c931677ce1a257d
> > Finished request 0
> > Going to the next request
> > --- Walking the entire request list ---
> > Waking up in 6 seconds...
> >
> >
> >
> > On Wed, 2004-07-07 at 10:47, Rinaldo Bergamini wrote:
> > > Hi Mark!
> > >
> > > Mark Hoffer wrote:
> > > > peap: default_eap_type = "gtc"
> > >
> > > try changing to default_eap_type = "mschapv2" in the PEAP section of the
> > > eap.conf . This must also be specified in the win xp network propreties.
> > >
> > > Hope this helps...
> > >
> > > -
> > > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
> > >
> >
> >
> > -
> > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
