Hello! I solved this problem: I changed encryption_scheme from `md5' to `crypt'. ;-}
-- Best regards, Sergei Koveshnikov. > Hi, im also using freeradius-1.0.0-pre3 + Postgres + pap + md5 without any > problem. Im using DIALUP_ADMIN to create user with md5 password. > > > > ----- Original Message ----- > From: "Sergei Koveshnikov" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Friday, July 23, 2004 4:44 PM > Subject: pap + md5 > > > Hello to everyone! > > I'm trying to use MAX6000 + freeradius-1.0.0-pre3 + Postgres + pap + md5 > > encryption for users passwords in the DB. > > But I've got auth error: > > ===== > > auth: Failed to validate the user. > > Login incorrect (rlm_pap: Configured MD5 password has incorrect length): > > [testuser/password] > > ===== > > Why User-Password = 'plain text password' in 'rad_recv' log ? > > Does radius decrypt password for debus purpouse before puts it on the > > screen? > > > Any ideas? > > Thank you! > > > > #### radiusd.conf: > > modules { > > pap { > > encryption_scheme = md5 > > } > > } > > authorize { > > auth_log > > files > > sql > > } > > authenticate { > > authtype MD5 { > > pap > > } > > } > > > > #### radiusd logs: > > rad_recv: Access-Request packet from host 192.168.0.1:1026, id=145, > > length=173 > > > User-Name = "testuser" > > User-Password = "password" > > NAS-IP-Address = 192.168.0.1 > > NAS-Port = 20214 > > NAS-Port-Type = Async > > Service-Type = Framed-User > > Framed-Protocol = PPP > > Calling-Station-Id = "80482320000" > > Ascend-Calling-Id-Type-Of-Num = Unknown > > Ascend-Calling-Id-Number-Plan = Unknown > > Ascend-Calling-Id-Presentatn = Allowed > > Ascend-Calling-Id-Screening = Network-Provided > > Acct-Session-Id = "429965508" > > Ascend-Data-Rate = 31200 > > Ascend-Xmit-Rate = 33600 > > #### skip some lines... > > rlm_sql (sql): Released sql socket id: 3 > > modcall[authorize]: module "sql" returns ok for request 0 > > modcall: group authorize returns ok for request 0 > > rad_check_password: Found Auth-Type MD5 > > auth: type "MD5" > > Processing the authenticate section of radiusd.conf > > modcall: entering group authtype for request 0 > > rlm_pap: login attempt by "testuser" with password password > > rlm_pap: Using password "$1$L8If2hAa$Oy91qkyF8lkWClyBi1I.u0" for user > > testuser > > > authentication. > > rlm_pap: Using MD5 encryption. > > rlm_pap: Configured MD5 password has incorrect length > > modcall[authenticate]: module "pap" returns reject for request 0 > > modcall: group authtype returns reject for request 0 > > auth: Failed to validate the user. > > Login incorrect (rlm_pap: Configured MD5 password has incorrect length): > > [testuser/password] (from client max2 port 20214 cli 80482320000) > > Delaying request 0 for 1 seconds > > Finished request 0 > > > > -- > > Best regards, > > Sergei Koveshnikov. > > > > - > > List info/subscribe/unsubscribe? See > > http://www.freeradius.org/list/users.html > > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html