Hi List, I have a trouble in EAP-LEAP authentification in FreeRADIUS, while an ordinary User-Password attribute works fine. Namely, when I enabled and configured NT-Password attribute in the 'users' file as in the below, I got 'Authentication fail'.
I appreciate any advice/hint to resolve this issue. Thanks. My Test environment ------------------------------------------------------- Server OS : FreeBSD4.10-RELEASE + FreeRADIUS-1.0.0-pre3 AP : Cisco AIRONET 1231G Client : WindowsXP + Cisco AIR-PCM350 ------------------------------------------------------- OK uesrs file config ----------------------------------------------------------- test User-Password == "test" ----------------------------------------------------------- NG uesrs file config ----------------------------------------------------------- test NT-Password := "0CB6948805F797BF2A82807973B89537" ----------------------------------------------------------- Fail Debug Log ----------------------------------------------------------- # /usr/local/radius/sbin/radiusd -X -A Starting - reading configuration files ... reread_config: reading radiusd.conf Config: including file: /usr/local/radius/etc/raddb/proxy.conf Config: including file: /usr/local/radius/etc/raddb/clients.conf Config: including file: /usr/local/radius/etc/raddb/snmp.conf Config: including file: /usr/local/radius/etc/raddb/eap.conf Config: including file: /usr/local/radius/etc/raddb/sql.conf main: prefix = "/usr/local/radius" main: localstatedir = "/usr/local/radius/var" main: logdir = "/usr/local/radius/var/log/radius" main: libdir = "/usr/local/radius/lib" main: radacctdir = "/usr/local/radius/var/log/radius/radacct" main: hostname_lookups = no main: max_request_time = 30 main: cleanup_delay = 5 main: max_requests = 1024 main: delete_blocked_requests = 0 main: port = 1645 main: allow_core_dumps = no main: log_stripped_names = no main: log_file = "/usr/local/radius/var/log/radius/radius.log" main: log_auth = no main: log_auth_badpass = no main: log_auth_goodpass = no main: pidfile = "/usr/local/radius/var/run/radiusd/radiusd.pid" main: user = "(null)" main: group = "(null)" main: usercollide = no main: lower_user = "no" main: lower_pass = "no" main: nospace_user = "no" main: nospace_pass = "no" main: checkrad = "/usr/local/radius/sbin/checkrad" main: proxy_requests = yes proxy: retry_delay = 5 proxy: retry_count = 3 proxy: synchronous = no proxy: default_fallback = yes proxy: dead_time = 120 proxy: post_proxy_authorize = yes proxy: wake_all_if_all_dead = no security: max_attributes = 200 security: reject_delay = 1 security: status_server = no main: debug_level = 0 read_config_files: reading dictionary read_config_files: reading naslist Using deprecated naslist file. Support for this will go away soon. read_config_files: reading clients Using deprecated clients file. Support for this will go away soon. read_config_files: reading realms radiusd: entering modules setup Module: Library search path is /usr/local/radius/lib Module: Loaded exec exec: wait = yes exec: program = "(null)" exec: input_pairs = "request" exec: output_pairs = "(null)" exec: packet_type = "(null)" rlm_exec: Wait=yes but no output defined. Did you mean output=none? Module: Instantiated exec (exec) Module: Loaded expr Module: Instantiated expr (expr) Module: Loaded PAP pap: encryption_scheme = "crypt" Module: Instantiated pap (pap) Module: Loaded CHAP Module: Instantiated chap (chap) Module: Loaded MS-CHAP mschap: use_mppe = yes mschap: require_encryption = no mschap: require_strong = no mschap: with_ntdomain_hack = no mschap: passwd = "(null)" mschap: authtype = "MS-CHAP" mschap: ntlm_auth = "(null)" Module: Instantiated mschap (mschap) Module: Loaded System unix: cache = no unix: passwd = "(null)" unix: shadow = "(null)" unix: group = "(null)" unix: radwtmp = "/usr/local/radius/var/log/radius/radwtmp" unix: usegroup = no unix: cache_reload = 600 Module: Instantiated unix (unix) Module: Loaded eap eap: default_eap_type = "leap" eap: timer_expire = 60 eap: ignore_unknown_eap_types = no eap: cisco_accounting_username_bug = no rlm_eap: Loaded and initialized type md5 rlm_eap: Loaded and initialized type leap gtc: challenge = "Password: " gtc: auth_type = "PAP" rlm_eap: Loaded and initialized type gtc mschapv2: with_ntdomain_hack = no rlm_eap: Loaded and initialized type mschapv2 Module: Instantiated eap (eap) Module: Loaded preprocess preprocess: huntgroups = "/usr/local/radius/etc/raddb/huntgroups" preprocess: hints = "/usr/local/radius/etc/raddb/hints" preprocess: with_ascend_hack = no preprocess: ascend_channels_per_line = 23 preprocess: with_ntdomain_hack = no preprocess: with_specialix_jetstream_hack = no preprocess: with_cisco_vsa_hack = no Module: Instantiated preprocess (preprocess) Module: Loaded realm realm: format = "suffix" realm: delimiter = "@" realm: ignore_default = no realm: ignore_null = no Module: Instantiated realm (suffix) Module: Loaded files files: usersfile = "/usr/local/radius/etc/raddb/users" files: acctusersfile = "/usr/local/radius/etc/raddb/acct_users" files: preproxy_usersfile = "/usr/local/radius/etc/raddb/preproxy_users" files: compat = "no" Module: Instantiated files (files) Module: Loaded Acct-Unique-Session-Id acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" Module: Instantiated acct_unique (acct_unique) Module: Loaded detail detail: detailfile = "/usr/local/radius/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" detail: detailperm = 384 detail: dirperm = 493 detail: locking = no Module: Instantiated detail (detail) Module: Loaded radutmp radutmp: filename = "/usr/local/radius/var/log/radius/radutmp" radutmp: username = "%{User-Name}" radutmp: case_sensitive = yes radutmp: check_with_nas = yes radutmp: perm = 384 radutmp: callerid = yes Module: Instantiated radutmp (radutmp) Listening on authentication *:1645 Listening on accounting *:1646 Listening on proxy *:1647 Ready to process requests. rad_recv: Access-Request packet from host 192.168.30.129:21645, id=108, length=129 User-Name = "test" Framed-MTU = 1400 Called-Station-Id = "000f.8f84.f160" Calling-Station-Id = "000a.f49c.5185" Message-Authenticator = 0x15185db84d3f3a807f4617bfe34795a3 EAP-Message = 0x020200090174657374 NAS-Port-Type = Wireless-802.11 NAS-Port = 325 Service-Type = Framed-User NAS-IP-Address = 192.168.30.129 NAS-Identifier = "fap3-b2-01" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 modcall[authorize]: module "chap" returns noop for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_realm: No '@' in User-Name = "test", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: EAP packet type response id 2 length 9 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 0 users: Matched test at 55 modcall[authorize]: module "files" returns ok for request 0 modcall: group authorize returns updated for request 0 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 0 rlm_eap: EAP Identity rlm_eap: processing type leap rlm_eap_leap: Stage 2 rlm_eap_leap: Issuing AP Challenge rlm_eap_leap: Successfully initiated modcall[authenticate]: module "eap" returns handled for request 0 modcall: group authenticate returns handled for request 0 Sending Access-Challenge of id 108 to 192.168.30.129:21645 EAP-Message = 0x01030014110100086d07497f90c8743574657374 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x5d17a48db92110b87b554a3c6ca2d76d Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... rad_recv: Access-Request packet from host 192.168.30.129:21645, id=109, length=174 User-Name = "test" Framed-MTU = 1400 Called-Station-Id = "000f.8f84.f160" Calling-Station-Id = "000a.f49c.5185" Message-Authenticator = 0x58c440826f9403ce7aa3d9c1300d1cc0 EAP-Message = 0x0203002411010018b42980eb3723b83bc441b6a6fe261c8c11e66cb2bcaa1a1474657374 NAS-Port-Type = Wireless-802.11 NAS-Port = 325 State = 0x5d17a48db92110b87b554a3c6ca2d76d Service-Type = Framed-User NAS-IP-Address = 192.168.30.129 NAS-Identifier = "fap3-b2-01" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 1 modcall[authorize]: module "preprocess" returns ok for request 1 modcall[authorize]: module "chap" returns noop for request 1 modcall[authorize]: module "mschap" returns noop for request 1 rlm_realm: No '@' in User-Name = "test", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 1 rlm_eap: EAP packet type response id 3 length 36 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 1 users: Matched test at 55 modcall[authorize]: module "files" returns ok for request 1 modcall: group authorize returns updated for request 1 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 1 rlm_eap: Request found, released from the list rlm_eap: EAP/leap rlm_eap: processing type leap rlm_eap_leap: Stage 4 rlm_eap_leap: FAILED incorrect NtChallengeResponse from AP rlm_eap: Handler failed in EAP/leap rlm_eap: Failed in EAP select modcall[authenticate]: module "eap" returns invalid for request 1 modcall: group authenticate returns invalid for request 1 auth: Failed to validate the user. Delaying request 1 for 1 seconds Finished request 1 Going to the next request Waking up in 6 seconds... - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html