Hi,
i was looking for a solution to my problem and found this thread. I have the
same problem. In the access request my access point sends the NAS Port (it
seems to be always 1), but in the accounting request it doesn't. Is there a
way to tell freeradius to consider the NAS Port from this NAS to be always 1?
Any help is appreciated.
Thanks,
Tacio
Radius Protocol
Code: Access Request (1)
Packet identifier: 0x5 (5)
Length: 211
Authenticator: 0x1E6F1E6F1E6F1E6F1E6F1E6F1E6F1E6F
Attribute value pairs
t:NAS IP Address(4) l:6, Value:192.168.3.10
t:NAS Port Type(61) l:6, Value:Wireless IEEE 802.11(19)
t:NAS Port(5) l:6, Value:1
t:Framed MTU(12) l:6, Value:1400
t:User Name(1) l:11, Value:"anonymous"
t:Calling Station Id(31) l:14, Value:"0004e2aa4ac4"
t:Called Station Id(30) l:14, Value:"000a5e08cc43"
t:NAS identifier(32) l:19, Value:"3Com Access Point"
t:State(24) l:18, Value:1196993835395516E8DBE47E298F6806
t:EAP Message(79) l:73
t:Message Authenticator(80) l:18,
Value:708DC656578C67A8781E1AD364816043
Radius Protocol
Code: Accounting Request (4)
Packet identifier: 0x0 (0)
Length: 175
Authenticator: 0x4BFB47C7B80FEC3400B854077F2F12FA
Attribute value pairs
t:Acct Status Type(40) l:6, Value:Start(1)
t:Acct Session Id(44) l:32, Value:"0004e2aa4ac4-000a5e08cc43-0397"
t:NAS IP Address(4) l:6, Value:192.168.3.16
t:Acct Input Octets(42) l:6, Value:1467
t:Acct Output Octets(43) l:6, Value:7918
t:Acct Input Packets(47) l:6, Value:8
t:Acct Output Packets(48) l:6, Value:54
t:Vendor Specific(26) l:28, Vendor:Undefined(1161908256)
t:Unknown Type(85) l:115, Value:Unknown Value Type
t:Vendor Specific(26) l:15, Vendor:Undefined(1447838030)
t:Unknown Type(32) l:73, Value:Unknown Value Type
t:Vendor Specific(26) l:15, Vendor:Undefined(1163088713)
t:Unknown Type(68) l:32, Value:Unknown Value Type
t:Vendor Specific(26) l:23, Vendor:Undefined(1161908256)
t:Unknown Type(84) l:121, Value:Unknown Value Type
t:Acct Session Time(46) l:6, Value:32
On Thursday 29 July 2004 16:21, Alan DeKok wrote:
> Karina <[EMAIL PROTECTED]> wrote:
> > Hi, i want to restrict users to just one session, but i have this
> > problem..
> >
> > When i debug the requests of the NAS to the radius server i find this:
> >
> > rlm_radutmp: No NAS-Port seen. Cannot do anything.
> > rlm_radutmp: WARNING: checkrad will probably not work!
>
> Your NAS has to send that port information. If it doesn't, the
> server has no way of enforcing simultaneous use.
>
> I would suggest posting the Access-Request packets here. They may
> contain information which would explain *why* there's no port.
>
> Alan DeKok.
>
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
