On Mon, Aug 23, 2004 at 10:15:00PM +0200, Adam KOSA wrote: I had asked the same question months ago and I was told that it is not possible...
> Hi List > > I'm sorry if this is a basic question here. I just set up freeradius, > using it to authenticate to network devices (instead local auth). I got > it up almost fine. In my raddb/users file, i have the following: > > test Auth-Type := Local, User-Password == "test", Simultaneous-Use := > 10, Calling-Station-Id == "10.19.5.1" > Service-Type = Login, > cisco-avpair="shell:priv-lvl=15" > > I understand that in the first line i can set up conditions, separated > by commas which all have to be true to permit login. How can i set up > an OR condition? I'm thinking about letting more IP-s in via radius, > not only allowing login from ip 10.19.5.1. > > Currently i duplicated the "test" user and the second entry has another > IP - this way i can login from both IP-s. But i don't like that i had > to duplicate the password, and every setting. But being new to > freeradius i know no more ways. > > I'd be greatful if one could describe a solution. > > Thanks > Adam > > > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > -- Kostas Zorbadelos Currently at: Otenet IT Department mailto: [EMAIL PROTECTED] Out there in the darkness, out there in the night out there in the starlight, one soul burns brighter than a thousand suns. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
