Could you explain how to use snmp to disconnect a session, I been told you need to use snmpwalk and do some configs on NAS to autentificate, also a problem is knowing what is the channel, ofcourse obtaining it by radius to send to the NAS a line clear.
I had tried to find a snmp scripts to do that specific function, without luck, I understand I need to understand better how snmp works, but taking a look on a piece of code will help a lot. Armando Leal. On 3 Sep 2004 at 0:19, Simon Bryden wrote: > There is a "RADIUS" disconnect mechanism which is not standardised as far as I > know and not too widely supported. In most cases you need to use SNMP or > other techniques to disconnect sessions. The most standardised way of > disconnecting sessions is to use Session-Timeout attribute to tell the NAS > when to terminate the session. > > Regards, > Simon. > --- > > On Thursday 02 September 2004 14:57, Edgars wrote: > > is there a way to do subj. from the freeradius - i'll use this when some > > time is reached. > > > > Edgars > > > > - > > List info/subscribe/unsubscribe? See > > http://www.freeradius.org/list/users.html > > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
