Hi All,
I am running Freeradius 1.0.0 and I can autheticate a client fine with LEAP
but with PEAP I get the following segmentation fault.
Any help is greatly appreciated.
rad_recv: Access-Request packet from host 172.30.2.7:21649, id=101,
length=117
User-Name = "baig"
Framed-MTU = 1400
Called-Station-Id = "0002.8aa3.02d8"
Calling-Station-Id = "000c.412d.01bd"
Service-Type = Login-User
Message-Authenticator = 0x854872664931c4fe56aae3c58b93f6b4
EAP-Message = 0x020100090162616967
NAS-Port-Type = Wireless-802.11
NAS-Port = 1226
NAS-IP-Address = 172.30.2.7
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
modcall[authorize]: module "preprocess" returns ok for request 0
modcall[authorize]: module "chap" returns noop for request 0
modcall[authorize]: module "mschap" returns noop for request 0
rlm_realm: No '@' in User-Name = "baig", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 0
rlm_eap: EAP packet type response id 1 length 9
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 0
users: Matched baig at 96
radius_xlat: 'Hello, baig'
modcall[authorize]: module "files" returns ok for request 0
modcall: group authorize returns updated for request 0
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 0
rlm_eap: EAP Identity
rlm_eap: processing type leap
rlm_eap_leap: Stage 2
rlm_eap_leap: Issuing AP Challenge
rlm_eap_leap: Successfully initiated
modcall[authenticate]: module "eap" returns handled for request 0
modcall: group authenticate returns handled for request 0
Sending Access-Challenge of id 101 to 172.30.2.7:21649
Reply-Message = "Hello, baig"
EAP-Message = 0x01020014110100084b6521fd17dff5de62616967
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x79c0c87bca1119fca67d5070537af5fd
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 172.30.2.7:21649, id=102,
length=132
User-Name = "baig"
Framed-MTU = 1400
Called-Station-Id = "0002.8aa3.02d8"
Calling-Station-Id = "000c.412d.01bd"
Service-Type = Login-User
Message-Authenticator = 0x092bec1c33d1923277c4244deee5c7e6
EAP-Message = 0x020200060319
NAS-Port-Type = Wireless-802.11
NAS-Port = 1226
State = 0x79c0c87bca1119fca67d5070537af5fd
NAS-IP-Address = 172.30.2.7
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 1
modcall[authorize]: module "preprocess" returns ok for request 1
modcall[authorize]: module "chap" returns noop for request 1
modcall[authorize]: module "mschap" returns noop for request 1
rlm_realm: No '@' in User-Name = "baig", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 1
rlm_eap: EAP packet type response id 2 length 6
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 1
users: Matched baig at 96
radius_xlat: 'Hello, baig'
modcall[authorize]: module "files" returns ok for request 1
modcall: group authorize returns updated for request 1
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 1
rlm_eap: Request found, released from the list
rlm_eap: EAP NAK
rlm_eap: EAP-NAK asked for EAP-Type/peap
rlm_eap: processing type tls
rlm_eap_tls: Initiate
rlm_eap_tls: Start returned 1
modcall[authenticate]: module "eap" returns handled for request 1
modcall: group authenticate returns handled for request 1
Sending Access-Challenge of id 102 to 172.30.2.7:21649
Reply-Message = "Hello, baig"
EAP-Message = 0x010300061920
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xfcdfe17825640d3c8e02641648f22dbf
Finished request 1
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 172.30.2.7:21649, id=103,
length=224
User-Name = "baig"
Framed-MTU = 1400
Called-Station-Id = "0002.8aa3.02d8"
Calling-Station-Id = "000c.412d.01bd"
Service-Type = Login-User
Message-Authenticator = 0x2d6ed31d2c2b0e7f8bd8a8f63a02eb50
EAP-Message =
0x0203006219800000005816030100530100004f03014138bce1851ca58cff10d6e22bcb085a
a5006530deaaf18a3cae07c0955a464000002800160013006600150012000a00050004000900
6300650060006200610064001400110003000600080100
NAS-Port-Type = Wireless-802.11
NAS-Port = 1226
State = 0xfcdfe17825640d3c8e02641648f22dbf
NAS-IP-Address = 172.30.2.7
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 2
modcall[authorize]: module "preprocess" returns ok for request 2
modcall[authorize]: module "chap" returns noop for request 2
modcall[authorize]: module "mschap" returns noop for request 2
rlm_realm: No '@' in User-Name = "baig", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 2
rlm_eap: EAP packet type response id 3 length 98
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 2
users: Matched baig at 96
radius_xlat: 'Hello, baig'
modcall[authorize]: module "files" returns ok for request 2
modcall: group authorize returns updated for request 2
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 2
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
rlm_eap_tls: Length Included
eaptls_verify returned 11
(other): before/accept initialization
TLS_accept: before/accept initialization
Thanks
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
