Sorry for the delayed reply. I didn't understand where the problem is.
Anyone could be kind to help me??! Regards, Hugo Sousa SysAdmin / NetworkAdmin http://www.netsystems.pt Portugal -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Willey Kurt D Sent: segunda-feira, 16 de Agosto de 2004 14:44 To: [EMAIL PROTECTED] Subject: RE: Handler failed in EAP/peap The error is higher up the debug output -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Hugo Sousa Sent: Sunday, August 15, 2004 2:06 PM To: [EMAIL PROTECTED] Subject: Handler failed in EAP/peap Hi all, I'm having a problem in the EAP/PEAP part, I think. I'm trying to authorize a Windows XP SP2 on my RADIUS, and the following problem ocurs: What could be the problem? (auth type = TLS). rad_recv: Access-Request packet from host 192.168.2.4:2048, id=0, length=168 ������� User-Name = "root" ������� NAS-IP-Address = 192.168.2.4 ������� Called-Station-Id = "000f66574649" ������� Calling-Station-Id = "0020ed792d18" ������� NAS-Identifier = "000f66574649" ������� NAS-Port = 12 ������� Framed-MTU = 1400 ������� State = 0x05b373c1c76de7ad819b9f5d89fd2526 ������� NAS-Port-Type = Wireless-802.11 ������� EAP-Message = 0x020800261900170301001b7ef3a5621ca382d03693d3be7d598f1c06d06d45d122b26e2300 e2 ������� Message-Authenticator = 0x582cee4856acc3a537c315ea71327ea9 � Processing the authorize section of radiusd.conf modcall: entering group authorize for request 8 � modcall[authorize]: module "preprocess" returns ok for request 8 � modcall[authorize]: module "chap" returns noop for request 8 � modcall[authorize]: module "mschap" returns noop for request 8 ��� rlm_realm: No '@' in User-Name = "root", looking up realm NULL ��� rlm_realm: No such realm "NULL" � modcall[authorize]: module "suffix" returns noop for request 8 � rlm_eap: EAP packet type response id 8 length 38 � rlm_eap: No EAP Start, assuming it's an on-going EAP conversation � modcall[authorize]: module "eap" returns updated for request 8 ��� users: Matched DEFAULT at 152 � modcall[authorize]: module "files" returns ok for request 8 modcall: group authorize returns updated for request 8 � rad_check_password:� Found Auth-Type EAP auth: type "EAP" � Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 8 � rlm_eap: Request found, released from the list � rlm_eap: EAP/peap � rlm_eap: processing type peap � rlm_eap_peap: Authenticate � rlm_eap_tls: processing TLS � eaptls_verify returned 7 � rlm_eap_tls: Done initial handshake � eaptls_process returned 7 � rlm_eap_peap: EAPTLS_OK � rlm_eap_peap: Session established.� Decoding tunneled attributes. � rlm_eap_peap: Received EAP-TLV response. � rlm_eap_peap: Tunneled data is valid. � rlm_eap_peap:� Had sent TLV failure, rejecting. �rlm_eap: Handler failed in EAP/peap � rlm_eap: Failed in EAP select � modcall[authenticate]: module "eap" returns invalid for request 8 modcall: group authenticate returns invalid for request 8 auth: Failed to validate the user. Delaying request 8 for 1 seconds Finished request 8 Going to the next request Waking up in 6 seconds... --- Walking the entire request list --- Sending Access-Reject of id 0 to 192.168.2.4:2048 ������� EAP-Message = 0x04080004 ������� Message-Authenticator = 0x00000000000000000000000000000000 Cleaning up request 8 ID 0 with timestamp 411f48d0 Nothing to do.� Sleeping until we see a request. � Regards, � Hugo Sousa SysAdmin / NetworkAdmin http://www.netsystems.pt Portugal - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
