On Wed 15-Sep-04 at 1130 EDT, Alan DeKok wrote:
>
> > After doing so, the output is still not much better:
> ...
> > users: Matched DEFAULT at 4
> > modcall[authorize]: module "files" returns ok for request 0
>
> So... it only matches on entry in the "users" file. Did you expect
> it to match more? If so, read "man users", and update the "users" file.
Sorry for my unclear writing...
My confusion is that my users file has now performed
DEFAULT Auth-Type := Accept
based on this output from radiusd -X:
users: Matched DEFAULT at 4
modcall[authorize]: module "files" returns ok for request 1
modcall: group authorize returns ok for request 1
According to the FAQ:
5.5 How do I permit access to any user regardless of password?
DEFAULT Auth-Type := Accept
and yet radiusd still rejects the user in the authenticate
section (output immediately follows lines shown above):
auth: No authenticate method (Auth-Type) configuration found for the request:
Rejecting the user
>From the FAQ and the 'authenticate' section comments in radiusd, I
thought "Accept" in the authorize section would give an immediate
authenticate without trying to use any authentication modules.
I've been reading the 2003 O'Reilly book, freeradius docs, and online
searches but haven't connected all the pieces yet. I hope my
questions aren't trying patience, and feel free to point me to other
sources of freeradius know-how.
Thanks,
Mike
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
