> Hi,
>
> Is there anyone out there who has successfully managed to make a Cisco
> WLSE authenticate against a freeradius server when joining a WDS? Cisco
> AP1200 access points successfully authenticate to the freeradius server
> through the WDS, but I have been unsuccessful when it comes to the WLSE.
>
Yes, with the 2 pathchs i post.
> A couple of weeks ago a patch for freeradius was posted to this mailing
> list that partially helped by fixing a Cisco bug - after applying the
> patch freeradius now Access-Accept's the WLSE's authentication and the
> access point I'm using as the WDS is showing the WLSE (or Wireless
> Network Manager) as being 'AUTHENTICATED' but the WLSE itself appears to
> go into a 'WLSE to WDS Authentication Status' of Authenticated only
> momentarily before switching back to unauthenticated. The WLSE then
> repeatedly retries to authenticate every 10 seconds (with freeradius
> logging successful authentications each time).
>
> Am I perhaps missing some attributes that I should be sending to the
> WLSE? We don't have a Cisco ACS to be able to compare what it sends.
> The users file entry is currently as follows (and has been many
> variations...) :
>
The entry in users file for the AP and the WLSE are the same, so if the
AP1200 are 'AUTHENTICATED' by the WDS, the WLSE must be also 'AUTHENTICATED'.
Run radiusd with -X and run Ethereal on your box to see where is your problem.
(You can take a demo version of ACS to verify your Cisco config.)
+--------------------------------------+
| ??? |
| {O-O} Richard Timsit |
| ^_ DIT TI |
| / T \_ EPFL Lausanne |
| '` I " 1015 Ecublens,SUISSE |
| M (021) 693 22 35 |
| | | [EMAIL PROTECTED] |
| I I |
+--------------------------------------+
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
