> From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On > Behalf Of Alan DeKok > Sent: Wednesday, September 22, 2004 7:22 PM > To: [EMAIL PROTECTED] > Subject: Re: LEAP stopped working > > "Matanya Elchanani" <[EMAIL PROTECTED]> wrote: > > We have two Aironet 350 bridges in a point-to-point config. We use > > Cisco-LEAP to get dynamic keys (unfortunately, LEAP is the only EAP > > protocol those bridges know). We have been using FreeRadius > 0.9.3 with > > this setup and it was working fine. We just upgraded to > FreeRadius 1.0.1 > > and LEAP stopped working. It fails in the following: > > You're running on Solaris, right? > > There's a bug in 1.0.1 which makes MS-CHAP (and LEAP) fail on some > systems. A solution for now would be to copy src/include/md4.h, and > src/lib/md4.c from 0.9.3 to 1.0.1, and re-build 1.0.1. >
Alan, You hit this right on the nail. We are running Solaris. Rebuilding with the 0.9.3 md4 code got LEAP working again! Couldn't find anything regarding this in BugZilla or the archives. Thank you very much for your help. Sincerely, -- Matanya Elchanani - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
