Tim, Looks like you are having some of the same trouble I am.
The config file that I am working with that I had to remove the Auth-Type from is the user file. Shaun On Wed, 29 Sep 2004 17:04:05 -0400, Tim Rich, Jr. <[EMAIL PROTECTED]> wrote: > Alan - Thanks for the quick reply. I am assuming that when you say " Don't > set "Auth-Type" The server will figure it out" you mean on the cisco as I > don't know where that would be set in the radiusd.conf; however, I have > followed the book to the "t" and it has local in it. So you say just remove > the local from the ppp authentication? > > Tim > > > > -----Original Message----- > From: Alan DeKok [mailto:[EMAIL PROTECTED] > Sent: Wednesday, September 29, 2004 5:02 PM > To: [EMAIL PROTECTED] > Subject: Re: freeRADIUS/Cisco 5300 configuration? issue? > > "Tim Rich, Jr." <[EMAIL PROTECTED]> wrote: > > Here is the clip from the output as Alan requested. (and thanks, Alan, I > > should have mentioned that I looked in the FAQ, the book, and the archives > > before posting the note - thanks for the reminder. I have been on the list > > for 17 months or so and realize how much you add to the list - Thanks for > > all you do.) > > Thanks. > > > rad_recv: Access-Request packet from host 192.168.10.29:1645, id=8, > > length=142 > > Framed-Protocol = PPP > > User-Name = "timrichjr" > > MS-CHAP-Challenge = 0xb39bb991e902d032 > ... > > auth: type Local > > auth: No User-Password or CHAP-Password attribute in the request > > auth: Failed to validate the user. > > Login incorrect: [timrichjr/<no User-Password attribute>] (from client > > USSCRAS01 port 9 cli async) > > Don't set "Auth-Type". The server will figure it out. > > In this case, setting "Auth-Type := Local" ensures that MS-CHAP, > EAP, etc. won't work. Don't do it. > > Alan DeKok. > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > > > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
