My Windows wireless card is set for 802.1x using PEAP. How do I set up PEAP on the radius box?
> -----Original Message----- > From: [EMAIL PROTECTED] [mailto:freeradius- > [EMAIL PROTECTED] On Behalf Of Paul > Sent: Tuesday, October 19, 2004 7:06 AM > To: [EMAIL PROTECTED] > Subject: Re: D-Link DWL-2700AP Enterprise Access Point > > Gene Rouse wrote: > > >I have recently completed a freeradius install and tested it using > >NTradping. Everything looks good. My access point is a D-Link DWL- > 2700AP > >outdoor access point. It supports (among other things) WPA-RADIUS and > >802.1x. The AP is configured to use 802.1x on port 1812 for auth and > 1813 > >for acctg. When I do a test with NTradping I can watch the requests come > >in. When I try to connect to AP I don't see any auth requests on the > >server. D-Link says the device is fully radius compliant. In the > >clients.conf I have the NAS configured as a type other since D-Link isn't > in > >the list with the other vendor's. I would like to know at least where I > can > >get started troubleshooting the issue. Is there a Windows software > utility > >that will let me read the info coming out of the NAS to see what it is > >sending? If more info is needed let me know so that I can forward it to > the > >list. > > > > > > > Is your wireless station using a supplicant to send a request, or are > you only testing with NTRadPing? I don't think NTRadPing will work > through the AP unless the connection is wide open as I guess it was in > your initial tests. Have you enabled 802.1x authentication on your > Windows station? > > One thing that I don't understand yet is why Windows requires WEP before > allowing 802.1x. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
