You could just add it and send it back through a bugs report in bugs.freeradius.org
I did so.
3) how can equivalent of the following users file be implemented with LDAP:
chel Auth-Type := MS-CHAP, NAS-IP-Address == 192.168.201.1 Service-Type = Framed-User, Simultaneous-Use = 1, Framed-Protocol = PPP, Framed-IP-Address = 192.168.201.2, Framed-IP-Netmask = 255.255.255.0, Framed-Routing = Broadcast-Listen, Framed-Filter-Id = "std.ppp", Framed-MTU = 1400, Framed-Compression = Van-Jacobson-TCP-IP
chel Auth-Type := MS-CHAP, NAS-IP-Address == 192.168.202.1 Service-Type = Framed-User, Simultaneous-Use = 1, Framed-Protocol = PPP, Framed-IP-Address = 192.168.202.2, Framed-IP-Netmask = 255.255.255.0, Framed-Routing = Broadcast-Listen, Framed-Filter-Id = "std.ppp", Framed-MTU = 1400, Framed-Compression = Van-Jacobson-TCP-IP
so, I need to records for "chel" user depending on NAS-IP-Address they come from.
In ldap you have only *one* record for each user. If you need different Framed-IP-Address attributes for each user depending on the NAS then you need to either:
Create multiple user entries and use a filter to find them: (&(uid=%u)(nasipaddress=%{NAS-IP-Address}))
Create multiple ldap module instances with different attribute mappings and depending on the NAS select the corresponding instance:
DEFAULT NAS-IP-Address == 192.168.201.1, Autz-Type := ldap1
two different LDAP servers ?
Cheers, Ilia Chipitsine
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-- Kostas Kalevras Network Operations Center [EMAIL PROTECTED] National Technical University of Athens, Greece Work Phone: +30 210 7721861 'Go back to the shadow' Gandalf
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
